Innse berardi aries 2r Milling-boring machine

Innse berardi aries 2r 

-BORING SPINDLE DIAMETER: 150-165-180 mm
- RAM/HEADSTOCK SIZE: 420x460 mm (AR1ES 2R), 500x550 mm (AR1ES 3R), 600x650 mm (AR1ES 3H), 600x650 mm (AR1ES 4H), 720x900 mm (AR1ES 5H)
- RAM/HEADSTOCK HORIZONTAL STROKE (W-AXIS): 
- BORING SPINDLE STROKE (Z-AXIS): 
- MAX. SPINDLE POWER (S1): 60-80 kW (AR1ES 2R), 100 kW (AR1ES 3R, AR1ES 3H, AR1ES 4H), 137-150 kW (AR1ES 5H)
- NOMINAL TORQUE ON MILLING SPINDLE (S1): 3,900-8,000 Nm (AR1ES 2R), 10,000-17,000 Nm (AR1ES 3R), 14,000-19,000 Nm (AR1ES 3H), 19,000-24,000 Nm (AR1ES 4H), 25,000-32,000 Nm (AR1ES 5H)
- NO. OF SPEED RANGES: 2 (AR1ES 2R), 2-3 (AR1ES 3R), 3 (AR1ES 3H, AR1ES 4H), 3-4 (AR1ES 5H)
- MAX. SPINDLE SPEED: 2,750-3,500 rpm (AR1ES 2R), 2,000 rpm (AR1ES 3R), 1,400-2,000 rpm (AR1ES 3H), 1,200-2,000 rpm (AR1ES 4H), 1,200-1,600 rpm (AR1ES 5H)
- RAM/HEADSTOCK VERTICAL STROKE (Y-AXIS): 3,000-5,000 mm (AR1ES 2R), 4,000-7,000 mm (AR1ES 3R), 4,000-7,000 mm (AR1ES 3H), 5,000-8,000 mm (AR1ES 4H), 6,000-10,000 mm (AR1ES 5H)
- COLUMN LONGITUDINAL STROKE (X-AXIS): 5,000-30,000 mm and over (AR1ES 2R), 6,500-30,000 mm and over (AR1ES 3R), 6,500-30,000 mm and over (AR1ES 3H), 6,500-30,000 mm and over (AR1ES 4H), 10,000-30,000 mm and over (AR1ES 5H)

The R Series is featured by closed section Ram. There are further detection and compensation systems which assure the maximum protruding straightness of the Ram (with or without attachments) and of the boring spindle.