Jagura jagura cylindrical grinder serie

JAGURA CYLINDRICAL GRINDER SERIES JAGURA Cylindrical Grinder Series are Semi-Auto AL series and Automatically NC series. They are including: JAG-CG175-AL CG350-A CG500-AL CG750-AL JAG-CG175-AAL PLC Control JAG-CG350-NC PC Base Control CG500-NC PC Base Control CG750-NC PC Base Control The NC series is equipped with HM1 operation system. The operator only needs to choose the required grinding path mode, set the operation parameters and input the required grinding size as well. Then, the machine starts grinding automatically.

JAG-CG350-NC JAG-CG500-NC JAG-CG750-NC

Machine Control And Operation Programming Manual Mode Program 1 Program 2 X Y PARAMETER Y WH a 1 2 Run Data Automatic Mode Machine Parameter

ADVANCED.

N AXIS Y

ROUGH: FAST TIMEx+655 TIMEx-IREC. STARTDELAY

R1NQ. Machine Construction The machine bed was designed using the most advanced mechanical principles, to minimize the external factors which can adversely impact accuracy. The bed is virtual vibration-free. It is constructed of high quality Meehanite cast iron, fully normalized for stability and distortion-free operation. The machine bed and slides are heat treated and precision ground and the guideways were designed with a longer span for optimum work table support.

The slideways are configured with a V and a Flat Way. They are hand-scraped and equipped with an automatic lubrication system, which presets the pressure and operation for smoothness and accuracy.

The grinding wheel spindle is constructed of high-quality alloy steel, SNCM439. It is normalized, tempered, carburized and sub-zero treated. It is then precision ground and precision machined. The spindle bearings are precision scraped. The spindle is well suited for long life, heavy-duty grinding, and deformation-free maximum wear resistance.

The spindle headstock was designed for high rigidity. The spindle is equipped with P4 grade, pre-pressurized bearings.

The spindle was designed for both fixed center and rotary center use. The operator can easily select either center mode or chuck clamping mode.

A workpiece positioning device comes standard and is conveniently located to assist in maximum production efficiency.

The rigid tailstock is constructed of hardened alloy steel to support the MT3 center. Sleeve tension is easily adjusted with one conveniently located knob.

JAG-CG750-NC Max. swivel over table Max. distance between centers Max. external grinding diameter Max. load of centers Wheel size x width x Grinding wheel motor Front and back travel distance Longitudinal Slide Servo Motor Cross Slide Servo Motor Micro adjustment Travel distance The distance of every turn Table Swivel angle Speed step no step Packing Packing size Measurement Gross weight All specifications and design 3-jaw Chuck Roller-type workhead Adjustable 3-point steady rest Balancing stand and arbor Magnetic coolant separator filter Internal grinding attachment Wheel flange Wheel flange removing nut Table mounting dresser Tungsten carbide tipped center Work driving dog set small, medium, large Tool box Coolant system Micro Cylindrical Grinding Machine JAGCG175-AAL JAG-CG175-AL Automatic Semi-automatic Wheel balance stand Magnetic coolant separator Optical meter 3-jaw Chuck workhead JAG-CG175-AAL Clamping diameters 120mm Balancing arbor Max. clamped unit length 175mm Cross feeding graduation Roller speed 0-360rpm Swivel angle Feeding method: automatic manual Front to back Left to right automatic automatic Large Spindle speed 0-3440rpm 60W box Workhead 60W Spindle Coolant system Main Motor Front to back Left to right Dimensions LxWxH Carbide bush Weight All specifications and design Eaching you... JAGULAR INDUSTRY LTD. AGENT: Hwa Taichung, Taiwan, Tel: E-Mail: