Jorns ag maxi bending machine

Jorns ag maxi bending machine  Product development at Jorns is a process, by evolving customer requirements. To machines are produced in equipped CNC machining centres - The bending capacities are available: using laser technology, welding robots, etc., as standard. This combination of advanced production methods results in products of the highest quality.

Machine is mounted ready for operation on a base frame and is Safety features provided with and equipment

safety stop for upper cheek height adjustable according to regulations - Hydraulic system is shipped in operational condition with filling

emergency stop bar stop and lock reach of operator - Hinged control unit

Emergency stop button stop and lock on control unit - sheet supports with slide inside machine job handling

Emergency stop pedal in foot-operated control unit stop and lock - Upper cheek with water bead

safety stop, upper cheek opens to a standard 80 mm all emergency stop situations - Lower cheek with marks

safety stop, upper cheek works in slow motion - cylinders with end-of-stroke cushioning

Upper cheek does not open if shear or bending cheek has started - Two-pedal control unit:

Bending cheek and shear do not start if upper cheek is open or under pressure 1eft pedal: step upper cheek down

Bending cheek does not start if shear is not in starting e. home position step upper cheek up

Undervoltage cut-out right pedal: step bending cheek starts only in automatic mode step emergency stop function

Choice of OP or CNC control system for machines of Maxi-Line range Control systems

Radius adjustment: OP control radius adjustment CNC control autom. radius adjustment The motorized back-stop type 91 is standard on CNC control system: Bending cheek range: 25-1000 mm/sec unit min. adjustment speed: 250 mm/sec accuracy: +/- 0.1 mm Auxiliary bar for bending cheek thicknesses 1= 25 mm and 30 mm Solid upper and lower cheeks with material thickness S= 24 mm

Options

Manual back-stop for OP control system range 25-1000 mm

Hydraulic shear for mm thick 40 kg/mm2 tensile strength sheet steel

Hydraulic shear for mm thick 40 kg/mm2 tensile strength sheet steel with adjustable air gap and blade penetration Cheek set M=A+E shear - sheet turning device in horizontal plane M =A+E shear - Auxiliary bar for bending cheek thickness 1= 20 shear cheek Auxiliary bar SM SM3 Technical data Type A B C E F G H K L Bending capacity Frames No. of Hydraulic. motor Weight bending 380V/50Hz approx TS 40 steel Stainl. V2A Semi-hard aluminium

The right to make design and operation changes is expressly reserved. Ordering data example: Bending capacity for steel x hydraulic shear hydraulic shear without shear Control systems: Working length Thanks to the design of the components, the bending path. This feature allows coated sheets to be handled. The couplings are installed on machines of the ranges. These systems with their engineered parts guarantee quality results. joints are equipped with friction bearings. A breakpoint is into the system, which come into action in of overload. The bending cylinders are with the coupling system and form an with it. coupling coupling The shear is used on the models. shear is an version of the old shear and is used on models. Cutting data steel aluminium Cutting data steel stainless steel aluminium stainless steel Special geometry and blade ensure neat edges. shear can be for gap and blade penetration. Support roller to support the cuttings Support roller to support the cuttings also be Kirchgasse Phone CH- Lotzwil Fax Switzerland MDL