jouanel pbs, pe, t model bender

Jouanel  Workshop benders PBS, pe, t model: reliability in all shapes The PBS bender is adapted for use in workshops as well as for use in fitting, maintenance, and prototype workshops. PE model: electric clamp bender Developed to provide precision bending and excellent productivity in thin sheet metal. The control provides clamping and allows the operator to manage insertion and extraction of metal sheets. Conforms to safety standards Supply: 400VThr-ph. Power 0.18 kW Allows automatic unclamping after bending to save time Equipped with anti-pinching system stop 1 cm T model: segment keys bender Version T of the PBS produces perpendicular bends on the same sheet metal as necessary; in order to produce boxes, trunking, and frames, etc. Horn type clamping tool: consult us The clamp is equipped with a fractioned heeled type tool consisting of various length elements, allowing any bend Other tool option heights to a maximum of 100 mm to be achieved chine Keys length in mm Clasp or radius heeled type Pвs2o4oτ tool clamping tool Number of keys Optional accessories see page 7 Useful bending 2040 2540 length mm Capacity mm Large apron Narrow apron Large apron Narrow apron steel S235JR  Apron provided with an interchangeable 5 stainless steel narrow tool and with a 25 mm large tool to increase bending capacity Galva  Adjustable angular stop graduated from 0 to Zinc, copper performing precise and identical bends Control Manual Manual PE model Electric clamp Electric clamp 3 The clamping tool is removable for special rules settings and easy maintenance Dimensions mm Pedal-operated clamp control allowing operator hands-free use. Eccentric driven Gross weight kg 680 790 Note: key type benders are referenced PBS2040T and provide the same 4 Bending radius adjustment by horizontal features as described below by reducing 30 of the capacity. apron fittings Minimum bend width: 10 the thickness Capacity for electric model PBЅ2540-12PE Cleared sides to allow up to 500 mm sheet metal edges or ø 18 mm upwards and 20 mm downwards flanges to go by