Kiheung combi machining center

Kiheung combi cnc machining center 

UNIVERSAL MACHINING CENTER
VERTICAL MACHINING CENTER
COMBI 

KIHEUNG DESIGNED UNIVERSAL HEAD

Achieve higher productivity with KIHEUNG's UNIVERSAL HEAD, renowned worldwide. Perform milling work at any desired angle by swiveling the head, significantly reducing setup time. The KIHEUNG COMB1-U series with UNIVERSAL HEAD and ATC enhances productivity by enabling vertical, horizontal, and 90° work with a single machine.

The COMBI-U series features the adoption of the Fanuc Oi-M system as standard. It also incorporates high-precision preloaded double nut ball screws, ensuring accuracy and smooth axis movement. Additionally, a telescopic chip cover is provided to protect the ground slideway.

For enhanced precision, linear scales are included for the X, Y, and Z axes as standard, ensuring long-term positioning and repeatability accuracy. Each machine undergoes rigorous inspection, including laser measurements for backlash and pitch error compensation, as well as a 10 ball bar test for roundness and geometric accuracy.

As optional features, the COMB1-U series offers:
- A protection cover to prevent chips and coolant water from scattering on the floor.
- A lift-up chip conveyor for efficient chip removal.
- A 24-tools vertical Automatic Tool Changer (ATC) with a twin-arm gripper, driven by a geared motor with cam and cam follower mechanism.
- The ATC with a 500mm movable range allows for accommodating larger workpieces.
- An A2-head, facilitating automatic vertical/horizontal positioning, thereby enhancing productivity for both vertical and horizontal machining tasks.

Here's the information presented more cleanly:

- Table size (length x width) mm: 2660/3140/3600 x 1100
- T-slots (number x width): 8 x 22
- Distance between T-slots mm: 125
- Max. permissible load kg: 4000
- Longitudinal travel mm: 2300/2800/3200
- Cross travel mm: 1400
- Height from table to vertical spindle nose mm:
  - RW371: -15/-1185(1200)
  - RW8: -5/-1115(1200)
  - RW10: -95/-1105(1200)
- Height from table to horizontal spindle nose mm:
  - RW6: -5/-1195(1200)
  - RW8: 0/-1200(1200)
  - RW10: 0/-1200(1200)
- Axes feedrate mm/min: 5000
- Rapid feedrate mm/min: 10000
- Taper (7/24): ISO 50
- Speed (High-Low 2steps) rpm: 1-4000
- Distance from column to vertical spindle center mm:
  - RW371: 1180
  - RW8: 1180
  - RW10: 1280
- Distance from column to horizontal spindle nose mm:
  - RW6: 1200
  - RW8: 1275
  - RW10: 1355
- Spindle drive motor Kw: 18.5 / 22
- Feed drive motor Nm: X: 22(30), Y: 40, Z: 22
- Coolant pump motor Kw: 0.25
- Chip screw motor Kw: 0.4
- Lubrication motor Kw: 0.1
- Hydraulic clamping motor Kw: 0.75
- Oi1 cooler Kw: 1.5
- Approx. machine new weight kg: 21500/24000/26000
- Floor space (length x width x height) mm: 6600/8440/8900 x 5060 x 4180

STANDARD:
- Control System: Fanuc Oi / Heidenhain TNC620
- Linear Scale: 3-axis linear scale
- Slideway: Hardened and ground slideway for 3 axes (Longitudinal, cross, and vertical)
- Cross Slideway:
  - X travel 2300mm: 4 slideway
  - X travel 2800 / 3200mm: 6 slideway
- Cooling System: Oil cooler
- Coolant System: Flood coolant system with tank and pump
- Chip Protection: Telescopic chip cover for X, Y axis
- Chip Screw: Chip screw in the rear of the bed
- Control Interface: Electronic handwheel
- Air Blow
- Power Off: Automatic power off with M function
- Connectivity: RS232C interface

OPTIONAL:
- Automatic Tool Changer: 24 ATC
- Head Options: A2-Head / A4-Head
- Control System Options: Fanuc 31i / Heidenhain iTNC530
- Spindle Orientation: Spindle orientation for rigid tapping
- Chip Conveyor: Lift up chip conveyor
- 4th Axis: Preparation of the continuous 4th axis
- Protection: Protection cover
- Splash Guard: Splash guard on the table