Kiheung combi V-10 vertical machining center

Kiheung v10 machining center 1

Table size (length x width) mm 2660/3140/3600 X 1100
T-slots (number x width) No. X mm 8 X 22
Distance between T-slots mm 125
Max. permissible load kg 4000
Longitudinal travel mm 2300/2800/3200
Cross travel mm 1050
Height from table to vertical spindle nose mm 100^ 950/100^ 1200
Feedrate mm/min 5000
Rapid feedrate mm/min 12000
Taper (7/24) ISO BT 50
Spindle Speed (Low-High 2 steps) rpm 6000(1-1500, 1501-6000)
Distance from column to vertical spindle center mm 1000
Spindle drive motor Kw 22/ 28
Feed drive motor Nm X:22, Y:40, Z:30/X:30
Coolant pump motor Kw 2.6
Chip screw motor Kw 0.4
Lubrication motor Kw 0.1
Hydraulic motor Kw 0.75
Oil cooler motor Kw 2.4
Tool magazine capacity 2'a 40
Max. tool diameter mm 230
Max. tool length mm 350
Max tool weight kg 20
Tool change time sec 8
Approx. Machine net weight kg 21000/23500/25500
Floor space (length x width x height) mm 6600/8440/8900 X 4700 X 4070

Here's the corrected version:

STANDARD
• Fanuc 31i/Heidenhain iTNC530
• 40-tool vertical tool changer
• ZF gearbox
• Spindle orientation for rigid tapping
• 3-axis linear scale
• Hardened and ground slideway for 3 axes (Longitudinal, cross, and vertical)
• 6 cross slideways
• Protection cover
• Oil cooler
• Flood coolant system with tank and pump
• Telescopic chip cover for X, Y axes
• Chip screw in the rear of the bed
• Electronic handwheel
• Air blow
• Automatic power off with M function
• RS232C interface
• Splash guard on the table

OPTIONAL
• Coolant through spindle
• Lift-up chip conveyor
• Preparation of the continuous 4th axis