Kiheung kbm machining center

Kiheung kbm machining center 

KiHeung's plant, established in 1989 with the enterprise idea of technical evolution, excellent goods, quality guarantee, and economical improvement, boasts a machining capability for cast components when needed through its machine shop.

GC 200 GE 200 (Korea Std. / Meehanite Std.):
- Tensile Strength: 200-300 N/m^2 / GE 200
- Brinell Hardness: 180-220 HB / GD 250
- Modulus of Elasticity: 115 KN/mm^2 / GB Ø GA 350
- Compression Strength: 720 N/mm^2 / GM 400
- Fatigue Limit: 7.15 / 90 N/mm^2
- Density: 0.8-1.2 g/cm^3 / 7.2

GC 250 - GD 250 (Korea Std. / Meehanite Std.):
- Tensile Strength: 250-350 N/m^2 / GE 200
- Brinell Hardness: 190-230 HB / GD 250
- Modulus of Elasticity: 125 KN/mm^2 / GB Ø GA 350
- Compression Strength: 840 N/mm^2 / GM 400
- Fatigue Limit: 7.2 / 120 N/mm^2
- Density: 0.8-1.2 g/cm^3 / 7.25

GC 300 - GB 300 (Korea Std. / Meehanite Std.):
- Tensile Strength: 300-400 N/m^2 / GE 200
- Brinell Hardness: 200-240 HB / GD 250
- Modulus of Elasticity: 135 KN/mm^2 / GB Ø GA 350
- Compression Strength: 960 N/mm^2 / GM 400
- Fatigue Limit: 7.25 / 140 N/mm^2
- Density: 0.9-1.3 g/cm^3 / 7.3

GC 350 - GA 350 (Korea Std. / Meehanite Std.):
- Tensile Strength: 350-450 N/m^2 / GE 200
- Brinell Hardness: 210-250 HB / GD 250
- Modulus of Elasticity: 140 KN/mm^2 / GB Ø GA 350
- Compression Strength: 1080 N/mm^2 / GM 400
- Fatigue Limit: 7.3 / 145 N/mm^2
- Density: 1.0-0.4 g/cm^3 / 7.4

GC 400 - GM 400 (Korea Std. / Meehanite Std.):
- Tensile Strength: 400-500 N/m^2 / GE 200
- Brinell Hardness: 210-260 HB / GD 250
- Modulus of Elasticity: 145 KN/mm^2 / GB Ø GA 350
- Compression Strength: 1200 N/mm^2 / GM 400
- Fatigue Limit: 7.4 / 150 N/mm^2
- Density: 1.1-1.4 g/cm^3 / N/A

GCD 400 - SF420. 12 (Korea Std. / Meehanite Std.):
- Tensile Strength: 420 N/m^2 / SF 420.12
- Elongation: 12% / SFP 500
- Brinell Hardness: 150-200 HB / SPF 600
- Modulus of Elasticity: 171 KN/mm^2 / SP 700
- Fatigue Limit: 7.15 / SH 800
- Density: 0.2-0.8 g/cm^3 / 90 N/mm^2
- Patternmaker's Contraction: N/A

GCD 500 - SFP 500 (Korea Std. / Meehanite Std.):
- Tensile Strength: 500 N/m^2 / SF 420.12
- Elongation: 8% / SFP 500
- Brinell Hardness: 170-220 HB / SPF 600
- Modulus of Elasticity: 173 KN/mm^2 / SP 700
- Fatigue Limit: 7.2 / SH 800
- Density: 0.2-0.8 g/cm^3 / 120 N/mm^2
- Patternmaker's Contraction: N/A

GCD 600 - SPF 600 (Korea Std. / Meehanite Std.):
- Tensile Strength: 600 N/m^2 / SF 420.12
- Elongation: 4% / SFP 500
- Brinell Hardness: 200-250 HB / SPF 600
- Modulus of Elasticity: 175 KN/mm^2 / SP 700
- Fatigue Limit: 7.25 / SH 800
- Density: 0.5-1.0 g/cm^3 / 140 N/mm^2
- Patternmaker's Contraction: N/A

GCD 700 - SP 700 (Korea Std. / Meehanite Std.):
- Tensile Strength: 700 N/m^2 / SF 420.12
- Elongation: 3% / SFP 500
- Brinell Hardness: 230-280 HB / SPF 600
- Modulus of Elasticity: 175 KN/mm^2 / SP 700
- Fatigue Limit: 7.3 / SH 800
- Density: 0.5-1.0 g/cm^3 / 145 N/mm^2
- Patternmaker's Contraction: N/A

GCD 800 - SH 800 (Korea Std. / Meehanite Std.):
- Tensile Strength: 800 N/m^2 / SF 420.12
- Elongation: 2% / SFP 500
- Brinell Hardness: 250-320 HB / SPF 600
- Modulus of Elasticity: 172 KN/mm^2 / SP 700
- Fatigue Limit: 7.4 / SH 800
- Density: 1.0-1.5 g/cm^3 / 150 N/mm^2
- Patternmaker's Contraction: N/A