Kiheung kmb u6 machining center

Kiheung kmb u6 machining center 

KMB-U6:
- Working Surface (Length x Width): 2200 x 550 mm
- T-Slots (Number x Width): 5 x 20
- Distance Between T-Slots: 80 mm
- Max. Permissible Load: 3000 kg
- Longitudinal Travel: 1600 mm
- Cross Travel: 720 mm
- Height from Table to Vertical Spindle Nose: 50-750 mm
- Height from Table to Horizontal Spindle Center: 60-760 mm
- Longitudinal & Cross Feedrate: 16-2000 mm/min
- Vertical Feedrate: 8-1000 mm/min
- Number of Feeds: 00
- Longitudinal & Cross Rapid Feedrate: 3200 mm/min
- Vertical Rapid Feedrate: 1600 mm/min
- Taper: NT50
- Number of Spindle Speeds: 12
- Speed: 40-1600 r.p.m (50/60Hz)
- Distance from Column to Vertical Spindle Center: 650 mm
- Distance from Column to Horizontal Spindle Nose: 660 mm
- Spindle Drive Motor: 11 Kw
- Feed Drive Motor: 2.2 Kw
- Coolant Pump Motor: 0.1 Kw
- Hydraulic Clamping Motor: 0.75 Kw
- Approx. Machine Net Weight: 8000 kg
- Floor Space (Width x Length x Height): 4760 x 2720 x 3050 mm
- Packing Size (Width x Length x Height): 2890 x 2610 x 3060 mm

POINT-U6:
- Working Surface (Length x Width): N/A
- T-Slots (Number x Width): N/A
- Distance Between T-Slots: N/A
- Max. Permissible Load: N/A
- Longitudinal Travel: N/A
- Cross Travel: N/A
- Height from Table to Vertical Spindle Nose: N/A
- Height from Table to Horizontal Spindle Center: N/A
- Longitudinal & Cross Feedrate: N/A
- Vertical Feedrate: N/A
- Number of Feeds: N/A
- Longitudinal & Cross Rapid Feedrate: N/A
- Vertical Rapid Feedrate: N/A
- Taper: N/A
- Number of Spindle Speeds: N/A
- Speed: N/A
- Distance from Column to Vertical Spindle Center: N/A
- Distance from Column to Horizontal Spindle Nose: N/A
- Spindle Drive Motor: N/A
- Feed Drive Motor: N/A
- Coolant Pump Motor: N/A
- Hydraulic Clamping Motor: N/A
- Approx. Machine Net Weight: N/A
- Floor Space (Width x Length x Height): N/A
- Packing Size (Width x Length x Height): N/A

Test Piece Dimensions:
- 600 x 400 x 300 mm

Type:
- Face Mill

Cutter Used:
- Diameter: φ160 mm
- Number of Teeth: 10

Material:
- P20

Machine KMB-U6:
- Spindle Speed: 220 r.p.m

Description PO1NT-U6:
- N/A

Cutting Speed:
- 110.5 m/min

Cutting Conditions:
- Cutting Depth: 5, 6 mm
- Feed per Tooth: 0.11 mm
- Feed: 250 mm/min
- Cutting Volume: 200, 240 cm³/min

Permissible Deviation:
- 300b x 500 mm

Machining Accuracy:
- Straightness: 0.015 mm
- Surface Trueness: 0.02 mm