Lagun milling machines

Lagun FU 1400 vertical cyrcle milling machine 

Model: FU-1400
- Working Surface: 1400 x 340 mm
- T-Slots Number and Size: 3-18
- Distance between T slots: 80 mm
- Rotary movement of table in both directions: 47
- Automatic Traverses:
  - Longitudinal: 950 mm / 37 13/32"
  - Cross: 330 mm / 13"
  - Vertical: 450 mm / 17 3/4"
- Spindle:
  - Horizontal Spindle Nose: ISO-50
  - Number of speeds of the spindle: 18
  - Speed Range: 28 - 1400 rpm
  - Rotating sense: 2
- Feeds:
  - Number of feeds: 18
  - Longitudinal and Cross Feed: 12 - 800 mm/min
  - Vertical Feed: 3.6 - 240 mm/min
- Quick Traverses: 3000 mm/min
- Driving Power:
  - Main Spindle: 6 HP
  - Feed Motor: 2 HP
  - Coolant Pump: 0.12 HP
- Net weight approx: 2800 kgs

Model: FU-1600
- Working Surface: 1600 x 340 mm
- T-Slots Number and Size: 3-18
- Distance between T slots: 80 mm
- Rotary movement of table in both directions: 47
- Automatic Traverses:
  - Longitudinal: 1150 mm / 45 9/32"
  - Cross: 330 mm / 13"
  - Vertical: 465 mm / 18 5/16"
- Spindle:
  - Horizontal Spindle Nose: ISO-50
  - Number of speeds of the spindle: 18
  - Speed Range: 28 - 1400 rpm
  - Rotating sense: 2
- Feeds:
  - Number of feeds: 18
  - Longitudinal and Cross Feed: 12 - 800 mm/min
  - Vertical Feed: 3.6 - 240 mm/min
- Quick Traverses: 3000 mm/min
- Driving Power:
  - Main Spindle: 10 HP
  - Feed Motor: 2 HP
  - Coolant Pump: 0.12 HP
- Net weight approx: 3000 kgs

Model: FU-1800
- Working Surface: 1800 x 400 mm
- T-Slots Number and Size: 5-18
- Distance between T slots: 70 mm
- Rotary movement of table in both directions: 47
- Automatic Traverses:
  - Longitudinal: 1300 mm / 51 3/18"
  - Cross: 430 mm / 17"
  - Vertical: 505 mm / 19 7/8"
- Spindle:
  - Horizontal Spindle Nose: ISO-50
  - Number of speeds of the spindle: 18
  - Speed Range: 28 - 1400 rpm
  - Rotating sense: 2
- Feeds:
  - Number of feeds: 18
  - Longitudinal and Cross Feed: 12 - 800 mm/min
  - Vertical Feed: 3.6 - 240 mm/min
- Quick Traverses: 3000 mm/min
- Driving Power:
  - Main Spindle: 15 HP
  - Feed Motor: 4 HP
  - Coolant Pump: 0.12 HP
- Net weight approx: 4000 kgs

Model: FU-2000
- Working Surface: 2000 x 450 mm
- T-Slots Number and Size: 5-18
- Distance between T slots: 80 mm
- Rotary movement of table in both directions: 47
- Automatic Traverses:
  - Longitudinal: 1500 mm / 59"
  - Cross: 430 mm / 17"
  - Vertical: 505 mm / 19 7/8"
- Spindle:
  - Horizontal Spindle Nose: ISO-50
  - Number of speeds of the spindle: 18
  - Speed Range: 28 - 1400 rpm
  - Rotating sense: 2
- Feeds:
  - Number of feeds: 18
  - Longitudinal and Cross Feed: 12 - 800 mm/min
  - Vertical Feed: 3.6 - 240 mm/min
- Quick Traverses: 3000 mm/min
- Driving Power:
  - Main Spindle: 20 HP
  - Feed Motor: 4 HP
  - Coolant Pump: 0.12 HP
- Net weight approx: 4200 kgs

Models:
FCM 1400 A
FCM 1600 A
FCM 1800 A
FCM 2000 A

Model: FCM 1400
- Working Surface: 1400 x 400 mm / 55" x 15 3/4"
- T-Slots Number and Size: 5-18
- Distance between T slots: 70 mm
- Automatic Traverses:
  - Longitudinal: 950 mm / 37"
  - Table Cross: 330 mm / 13"
  - Overarm Cross: 550 mm / 21 21/32"
  - Vertical: 465 mm / 18 1/2"
- Spindle:
  - Horizontal Spindle Nose: ISO-50
  - Number of speeds of the spindle: 18
  - Speed Range: 28 - 1400 rpm
  - Overarm spindle range: 36 - 2000 rpm
- Feeds:
  - Knee Number: 18
  - Overarm Number: infinite
  - Longitudinal and Cross Feed: 12 - 800 mm/min
  - Overarm Cross Feed: 13 - 900 mm/min
  - Vertical Feed: 3.6 - 240 mm/min
- Quick Traverses:
  - Longitudinal and Cross: 3000 mm/min
  - Overarm: 1300 mm/min
  - Vertical: 900 mm/min
- Driving Power:
  - Horizontal Spindle Motor: 6 HP
  - Overarm Spindle Motor: 7.5 HP
  - Knee Feed Motor: 2 HP
  - Overarm Feed Motor: 2 HP
  - Coolant Pump Motor: 0.12 HP
- Net weight approx: 3500 kgs

Model: FCM 1600
- Working Surface: 1600 x 400 mm / 63" x 15 3/4"
- T-Slots Number and Size: 5-18
- Distance between T slots: 70 mm
- Automatic Traverses:
  - Longitudinal: 1150 mm / 47"
  - Table Cross: 330 mm / 13"
  - Overarm Cross: 550 mm / 21 21/32"
  - Vertical: 465 mm / 18 1/2"
- Spindle:
  - Horizontal Spindle Nose: ISO-50
  - Number of speeds of the spindle: 18
  - Horizontal spindle Range: 28 - 1400 rpm
  - Overarm spindle range
- Feeds:
  - Same as FCM 1400
- Quick Traverses: Same as FCM 1400
- Driving Power: Same as FCM 1400
- Net weight approx: 3700 kgs

Model: FCM 1800
- Working Surface: 1800 x 400 mm / 71" x 15 3/4"
- T-Slots Number and Size: 5-18
- Distance between T slots: 70 mm
- Automatic Traverses:
  - Longitudinal: 1300 mm / 51"
  - Table Cross: 430 mm / 17"
  - Overarm Cross: 640 mm / 25 13/64"
  - Vertical: 480 mm / 18 3/4"
- Spindle, Feeds, Quick Traverses, Driving Power, and Net weight are the same as FCM 1400 and FCM 1600.

Model: FCM 2000
- Working Surface: 2000 x 450 mm / 78 3/4" x 17 3/4"
- T-Slots Number and Size: 5-18
- Distance between T slots: 80 mm
- Automatic Traverses:
  - Longitudinal: 1500 mm / 59"
  - Table Cross: 430 mm / 17"
  - Overarm Cross: 640 mm / 25 13/64"
  - Vertical: 505 mm / 19 7/8"
- Spindle, Feeds, Quick Traverses, Driving Power, and Net weight are the same as FCM 1400, FCM 1600, and FCM 1800.

**Standard Equipment:**
- 2 arbor support brackets (FU and FCM models).
- One milling arbor Ø 27 mm (FU and FCM models only).
- Independent electrical cabinet including:
  - Contactors.
  - Thermal relays for safety.
  - Transformer for lower voltages.
  - Safety isolating switch.
  - Independent motors for speeds and feeds.
- Complete coolant equipment.
- Complete lubrication equipment.
- Start/Stop pushbuttons.
- Set of tools and instruction book.
- Automatic Lubrication (1800/2000).
- Electromagnetic clutch for braking of the main spindle (1800/2000).

**Optional Equipment:**
- Hardened and ground slideways.
- Automatic lubrication (1400/1600).
- Pneumatic quick tool changer for Headstocks.
- Electro-magnetic clutch for braking of the main spindle (1400/1600).
- Recirculating ball screw on longitudinal and cross traverses.
- Digital readout on 2 or 3 axes.
- Hydraulic vices and mechanical vices.
- Rotary tables.
- Universal dividing head.
- Slotting attachment.
- Rack milling attachment.
- Attachment for gear hobbing.
- Long milling arbors 22 mm, 27 mm, 32 mm, 40 mm diameter or imperial sizes.
- Stub milling arbors 22 mm, 27 mm, 32 mm, 40 mm diameter or imperial sizes.
- 150 taper to ISO open end taper.
- ISO taper to Morse open end taper.
- Collet holders with metric or imperial collets.
- Splash tray.
- Machine lamp.

**Standard Equipment:**
- Two arbor support brackets (FU models).
- One milling arbor (FU models) Ø 27 mm.
- Electromagnetic clutches and brakes for the 3 axes.
- Electromagnetic clutch for braking of the main spindle.
- Recirculating ball screw for the longitudinal traverse.
- Hardened and ground slideways.
- Independent electrical cabinet according to the automatic cycle ordered.
- Independent motors for speeds and feeds.
- Complete coolant equipment.
- Complete lubrication equipment.
- Start/Stop and cycle pushbuttons.
- Set of tools and instruction book.

**Optional Equipment:**
- Automatic lubrication.
- Electrical quick change tool mechanism for heads.
- Recirculating ball screws for cross and vertical traverses.
- Hydraulic vice and mechanical vice.
- Automatic and semi-automatic dividing heads.
- Automatic rotary tables.
- Slotting attachment.
- Rack milling attachment.
- Attachment for gear hobbing.
- Long milling arbors 22 mm, 27 mm, 32 mm, 40 mm diameter or imperial sizes.
- Stub milling arbors 22 mm, 27 mm, 32 mm, 40 mm diameter or imperial sizes.
- ISO taper to ISO open end taper.
- ISO taper to Morse open end taper.
- Collet holders with metric or imperial collets.
- Splash tray.

Vertical head
Spindle brake
Universal head
Automatic lubrication
Universal Head (double rotation)
Swing bracket for Head in Ram type machines

Universal dividing head B- 125 - 150 - 175 - 200 mm.
Attachment for gear hobbing
Rotary tables Ø 250 - 320 - 400 mm.
Digital readout on 2 or 3 axes
Slotting attachment 125 mm.
Hydraulic vices
Rack milling attachment
Mechanical vices

Pneumatic quick tool changer
ISO taper to 150 open end taper
Long milling arbors Ø 22 - 27 - 32 - 40 - 50 mm.
Stub milling arbors
ISO taper to MORSE open end taper
Splash tray
Collet holders and collets
Machine lamp