Lang ONDOMAR VS Tube and pipe bending machine

Compression bending machines Model ONDOMAT for series and mass production The application of these hydraulically operated counter-pressure bending machines will obtain the efficient bending of tubes, profiled tubes and sections, with small bending radii without the application of bending mandrels. The bending sequence is automatic, handling of the tubes is manual. Bending tool supports are designed for fast setup times. Bending angle program unit permits an automatic, functional sequence up to 12 different bending angles. ONDOMAT VN with positioning cams Due to the smallest tool support, it is possible to produce closed frames and bending shapes in various configurations. The machine can be supplied with multiple grooved bending tools. Max. bending angle depending on bending radius. Technical Data: ONDOMAT ONDOMAT 40 VN 60 VN bending cycles for connected load kW ONDOMAT VNS while bending ONDOMAT VS The machine is similar to model VN but modified for bending U-shaped parts with 2 or 3 bends in one bending sequence with high precision in leg width. In a special modification VNS, these machines can be supplied for bends up to Technical Data: ONDOMAT ONDOMAT 11 max. tube mm max. bending radius for 180 bends mm U-frame width centre/centre bending cycles angle single bend, cycles/h connected load kW ONDOMAT VS while bending U-frames Technical data is subject to modifications.