Lissmac SBM-XS grinding machine

Lissmac SBM-XS grinding machine  

XS-series for small parts
Innovative turning station
Aggregat 1= G-grinding head for deburring
Aggregat 2= E-brush head for uniform edge
rounding on all sides

SBM-XS
The XS-series for the deburring of small parts is equipped with 2 stations on both the top and the bottom side. A cross belt (G-unit) and two rotating, flexible lamellar brush units (E-unit), in a single pass, deburr the parts and leave a uniform edge rounding on all sides. Two available options are:
- Magnetic table: part dimensions of 25 x 25 x 1 mm up to maximum 200 x 200 x15 mm (geometry-dependent)
- Vacuum table: part dimensions of 45 x 45 x 1 mm up to maximum 200 x 200 x15 mm (geometry-dependent)

A higher level of automation ensures an economic and reliable deburring process, also for large quantities of parts. Due to the swinging away of the innovative turning station, it is possible to deburr parts longer than 200 mm. The deburring process ensures an even wear of the belt and brushes across the entire width of the machine.

Working width max. 300 mm
Workable material thickness: 1 - 15 mm
Voltage: 400 V, 50 Hz / 480 V, 60 Hz
Total power: 8 A / 9 A
Total current consumption: 5 kW - 6.5 kW
Insulation class: IP 42
Infinitely variable feed speed: 0 - 4 m/min
Adjustment of material thickness: Electric
Adjustment of tools: Manual
Weight: Approx. 1375 kg
Dimensions (W/D/H): Approx. 1300/2300/1900 mm