LTF microtechnica 600 messuring systeem

 LTF microtechnica 600 messuring systeem

ATLAS, available in two Uersions with 600, respectively 760 mm diameter screen, is a measuring system featuring the application of the latest developments in optics, optoelectronics, mechanics and electronics. Once again the prestigious brand name of Microtecnica Profile Projectors confírms íts leadership in the desígn and production of
superior Profíle Projectors. The highly technological content of Mícrotecníca š Profile Projectors, "dressed" by a famous European team of industrial designers (*) has brought into
realízation an outstanding instrument, ín whích also shape and colours play an ímportant role, in terms of;
— PERFORMANCE
— RELIABILITY
— ERGONOMIC CONFIGURATION

MANUFACTURING PECULIARITIES
ERGONOMIC CONFIGURATION - The projectíon screen of respectively 600 and 760 mm is placed at the side of the worktable set (this design was introduced as fírst by Mícrotecníca in 1954 on former Cyclop Model called P 1000) thus allowing to the operator a free
access to the screen. The lamp holder arms for both diascopic and episcopic projections, as well as the digital display/data processor holder support, can be
pivoted making ít easier to place heavy and large parts on the worktable.
MODULARITY - The concept of modularization has been applied to ATLAS Mode1 resulting in the harmonic integration of all components.
UPRIGHT and UNREVERSED 1MAGE -(Optional). In addition to the traditional principle, the ATLAS 600 can be supplied, on request, wíth a special devíce gíving an upright and unreversed image viz. the projected part appears exactly as seen by the operator, upríght and correct right to left. This represents a big advantage sínce it allows a more precise use of the optical comparator avoiding therefore any possible misinterpretatíon of the ímage projected on the screen.

PROJECTION SYSTEMS
The ATLAS Model operates with the following systems which allow an extenslve range of applications: horízontal díascopic (standard), vertical diascopic and episcopic.

VERTICAL DIASCOPIC PROJECTION - Photo 3
Is obtaíned by means of the same illuminator as for the epíscopic, but with addition of a glass support with integra145° mirror on which small and/or thin pieces can be
placed directly.
Thís effectívely creates a second profíle projector givíng a big íncrease ín the scope and use of ATLAS model. The object fie/d is the same as for the horizontal díascopíc projection whilst the measuring field, obviously, is límited accordíng to the prísm síze, placed inside the glass support, which is mm 245x105 (accessory 780 - VBC).

OPTICAL SYSTEM
It íncludes interchangeable lenses with 5, 10, 20, 50 and 100 magnifications, optical condensers and mírrors.
LENSES - The dedícated optícal calcu/ation and hígh accuracy manufacturing enable to get parafocalized and telecentríc lenses wíth an optícal distorsion lower than 0, 05%.
OPTICAL CONDENSERS - Two condensers whích gíve parallel and collímate líght beams are provided. One for
the 5X lens and the second for ll/ other magníficatíon lenses.
OPTICAL MIRRORS - High accuracy manufacturing and suitab/e ref/ectíng coating ensure the highest level of accuracy and brightness of the image projected on the screen.
PROJECTION SYSTEMS - In addítion to the tradítíonal principle the At/as 600 can be supplíed, on request, with a special optical device giving an upright and unreversed image. Note: 5X lens ís only available for standard optical system.
The tables show the optical data of all avaílable magnífícation lenses as well as maximum díameter of the piece checkable in horizontal díascopic projection.

1: Optical condenser
2: Magnification lens
a: Focal clearance
b: Condenser clearance
c: Max. work diameter-half aperture-inspected piece center-line below optical axis
d: Max. work diameter-full aperture-ínspected piece center-line below optícal axis
e: Max. work diameter-half aperture-inspected piece center-line above optical axis
f-f: Focal clearance

780-D-155
Paír of dead centres, height 155 mm - Dístance between centres fítted on the standard worktable: mm 410.
780-D-50
Paіг of dead centres, height 50 mm - Distance between centres fitted on the standard worktable: mm 470.
780-DS-75
Paіг of riser blocks for dead centres, height 75 mm - Tota1 height mm 125
780-F
Turntable of 150 mm diameter, rotation of 360°, 90° graduatíon, 1° reading
(it accepts standard supports).
780-S F
Support with vice, useful jaws capacity mm 35
780-S M N
Universal support with swivel více, useful jaws capacity mm 35, rotation of
360° oп the vertical axis (1 ° reading), and 180° oп the horízontal axis
780-SMD
Two posítíons vice support
780-VZ
Uee support wíth locking stirrup for cylíndrical shafts, wíthout centers
marking, dia. 90mm.
780-V M
Magnetic vee base.
780-VMG
Double magnetic vee support
780-PC1-40
Pair of prísm support in stainless steel(mm 40x40x50)
780-ST 40
Pair of lockíng stírrup for prism 780-PC140
780-VS-100
Vertical support of g/ass dísks Ø mm 100 used for checkíng thin components (sheet, etc).
780-G F
Green fílter to increase the contrast and to reduce eye-stress.
780-RC
G/ass master scale - 0,1 mm divisions - for magnificatíon checkíng.
780-RL
G/ass master scale for linear measurements directly on the projector
screen: RL400 - 400 mm length RL500 - 500 mm length
780-L
Magnifying lens wíth rubber base (useful for focussing as well as collimation checkíngs)
780-G C
Film or glass chart for reproducing grids, concentric círcles, angular divisions and threads.
780-MT 1000-C
Standard digítal displays/data processor for the worktable dísplacements and angular projectíon screen measurements. Same data processor
allows geometric measurements of the components under testíng.
780-QC-200
Dígítal Readout/Data Processor for geometríc measurements. Data acquisitίon can be carried out through an optical sensor which reduces human errors, in comparíson wíth the cross-haír collimation, with consequent time saving, better accuracy and hígh efficiency. (Detaíled features are reported on the relevant brochure).
780-QC-4000 / 780-QC-5000
Personal Computer wíth two coordinates geometrical measurements software, Wíndows environment - graphic representatíon of the part under testíng - CAD interface (detaíled features are reported on the dedícated brochure)
780-CNC
CNC for automatic part ínspection based on teach-ín system. Test certificate Print-out - CAD interface facilíty.