Ltf u20 hydraulic tool and cutter grinding machines

Ltf u20 hydraulic tool and cutter grinding machines 

All the machines have a removable spindle to allow prolonged use for horizontal grinding operations. The wheel spindle axis can rotate 360° in the horizontal plane and can be tilted by ±20° in the vertical plane. The wheel spindle axis has two ends for keying the wheel and can be rotated in either direction for both "R" and "R1" fixed-speed versions, and for the "V" and "V1" versions, with variable speed control. The longitudinal carriage moves along a pair of guides with crossed and pre-loaded rollers, in tempered steel, which ensures a high load capacity and avoids tipping over at the end of the travel. The upper table can be tilted by ±90° in the horizontal plane. Dual controls make grinding operations on the machine easy. In the "R1" and "V1" models, the hydraulic equipment allows the longitudinal carriage to be automatically fed crosswise, with adjustable speeds from 0.1 to 12 m/min.

A position limiter on the speed controller allows the operator to set up a cross-feed to switch immediately from the stop position to the selected working speed. In the "R" and "R1" models, a fitted safety device prevents the machine from starting up if the wheel mounted on the spindle is not compatible with the selected rotation speed. On all models, it is possible to fit horizontal control for vertical movement.

SPECIFICATIONS R 1J20 V
Max. swing over centers 8.5/8"
Length between workhead and tailstock
- with workhead A020010 Morse Taper 4 13.3/8"
- with workhead A020011 150 40 12.3/4"
- with workhead A020200 1S0 50/M.T 5 11 "
Max. center distance 15.3/4"
Working surface of table 25.5/8 x 4.1/8"
Swivel of worktable ± 90°
Longitudinal traverse of worktable 13.3/4"
Vertical displacement of wheelhead 7.3/4"
Axial displacement of wheelhead 6.1/2"
Swivel of wheel spindle 360°
Tilt of wheel spindle ± 20°
Max. wheel diameter for tool grinding 6"
Max. wheel diameter for grinding operations 7.1/8"
Morse Taper of right-hand tailstock N° 1
Max. external grinding length
- with workhead A020010 Morse Taper 4 8"
- with workhead A020011 1S0 40 7.1/4"
- with workhead A020200 1S0 50/M.T 5 5.1/2"
Max. surface ground with model U20 R1 12.5/8" x 5.1/8"
Table traversing speed with U20 R1 0 to 40 ft.p.m.
Wheel spindle speeds 2850-5670 2000-9000
Speeds of internal grinding wheel spindle 14500-29000 9400-30000
Speeds of motorized workhead
- with workhead A020010 Morse Taper 4 95-160-250 r.p.m.
- with workhead A020011 1S0 40 95-160-250 r.p.m.
- with workhead A020200 1S0 50/M.T 5 90-150-235 r.p.m.
Power of wheelhead motor - normal 1,1-1,5 1-2,3
Power of workhead motor 15 H.P.

The original leaflets are for sale. A preview is shown. The price of the leaflet is on request.