Lugong MB 42100 CNC Vertical honing machine

Lugong MB 42100 CNC Vertical honing machine

- Diameter Range: Φ50mm-Φ100mm
- Max Stroke Length: 0-450mm
- Hole Length: Max 300mm
- Stroke Control: Servo Motor
- Spindle Speed: 0-500rpm
- Stroke Rate: 22m/min
- Spindle Motor: 4kw
- Precision Honing Feed Motor: 0.4kw
- Power Supply: 380V

This machine in one process can complete rough and finish honing. One spindle is controlled by two servo motors which drive double rods to control the expansion of **rough** and **finish** honing stone. The retraction of the honing stone is controlled by the mechanical spring.

The machine is fully enclosed by a metal plate, which avoids leakage of honing oil. The vertical axis structure allows two spindles to process and flush respectively without influencing each other.

Linear guides, servo motors, and ball screws are applied on the Z-axis. The feeding speed can be set via the touch screen. This function is efficient for the "blind hole"

The motor of the Z-axis is a frequency conversion motor with a reducer, and the function of frequency conversion is controlled in the electric cabinet. The speed can be set via the touch screen.

Bore's precision check can be finished via the active online pneumatic measuring instrument (one set each station). The secondary filter element used for compressed air is on the machine. The filter precision meets the measuring instrument's requirement.