Matec 50L machining center

Matec Taper SK50 - Power for heavy machining

The machining center matec-50 L is the largest and the most powerful machine of the L-series. Similar to matec-30 L and matec-40 L, matec-50 L possesses long traverse paths in all axes: X-axis up to 12,000 mm, Y-axis up to 1,200 mm and Z-axis up to 1,100 mm. A tool changer constructed especially for matec-50 L provides for quick and secure change of heavy tools.

Special features
Tool system SK 50/HSK-A 100
Power capacity up to 68 kW

Specifications

Working area X-axis 2,000-12,000 mm

Working area Y-axis 1,000 1,200 mm

Working area Z-axis 900 1,100 mm

Distance spindle nose/table 100-1,000 100-1,200 mm

Machine table width 1,035 1,235 mm

T-slots 18 H8 Spindle SK 50 HSK-A 100

Speed 8,000 12,000 rpm

Power 44 68 kW - 20 DC

Torque, max. 350 460 Nm - 20 /o DC

Rapid feed 30 40 with linear drive m/min

Drilling performance in steel 80 100 mm

Tapping in steel M30 M36

Milling capacity in steel 1,000 1,100 cm3/min

Tool magazine 40 60 up to 200 pcs

Tool diameter, max. 104 200 mm

Tool length, max. 460 mm

Tool change time approx. 8,5 sec

Chip-to-chip time approx. 9,5 sec

Specifications valid for Y-axis=1,000 mm

Traverse paths X-axis mm 2,000 3,000 4,000 5,000 6,000 up to 12,000

Machine table length mm 2,500 3,500 4,500 5,500 6,500 12,500

Twin table mach. max. vert. mm 2x500 2x1,000 2x1500 2x2,000 2x2,500 2x5,500

Machine length approx. mm 5,870 7,150 8,460 9,740 11,020 18,700

Weight, approx. t 24 32 39 46 53 95

Subject to technical changes

Swivel table series
Highly productive machines for series production
matec-30 SH             matec-30 SD
matec-30 S                matec-30 SHV
matec-30 SG

Traveling column series
Highly flexible machines for single and series production
matec-30 L               matec-30 HVT
matec-30 L               duo matec-30 HVTH
matec-30 LD            matec-30 HV duo
matec-40 L               matec-40 HV
matec-50 L               matec-50 HV
matec-30 HV            matec-30 HVU
matec-30 HVE          matec-40 HVU
matec-30 HVK          matec-50 HVU
matec-30 HVC

Gantry series
The specialists for the machining
of voluminous and heavy work parts
matec-30 P with motor spindle vertical
matec-30 P with 1-axis swivel head
matec-30 P with 2-axis swivel head
matec-50 P with 2-axis swivel head
matec-30 PP with pallet changer
matec-40 PP with pallet changer

Based on our standard machine series we develop
custom-made machines and complete solutions