Maximart Q15 CNC machining center

Maximart Q15 CNC machining center 

EXTO HEAVY CAPACITY
BUILT TO LAST
HEIDENHAIN FULL DIGITAL CNC/AC SERVO PACKAGE.
WORK TABLE : 1700mm X 820mm. X/Y/Z TRAVEL : 1520mm. ATC : DIN 50 ARM TYPE 24 TOOLS. STANDARD RAPID TRAVEL: X/Y: 20 meter/mín. Z: 16 meter/min. FRONTSIDE CHAIN TYPE CHIP CONVEYOR. SINGLE SIDE MACHINE WEIGHT : 16000 kgs.
Y AXIS CHIP FLUSHING SYSTEM Q-15, 0-18 on iy The Y axís chip flushing device is designed at the Y front and rear for easíer remove chips to coolant pan. The chips then will be carried away by screw chip conveyor. Q-18 FANUC Oi-MF FULL DIGITAL CNC/AC SERVO PACKAGE. WORK TABLE : 2000mm X 820mm. X/Y/Z TRAVEL : 1820mm x 800mm x 700mm. ATC : BT 50 ARM TYPE 24 TOOLS. STANDARD RAPID TRAVEL: X/Y: 20 meter/min. Z: 16 meter/min.
FRONTSIDE CHAIN TYPE CHOP CONVEYOR. SINGLE SIDE
ZF 2-SPEED GEARBOX WITH COOLER. MACHINE WEIGHT : 16800 kgs REVIEWED AND RENEWED HEAVY-DUTY BOXWAYS VMC, THE ATLAS Based on the concept of constant R D as
well as innovation, from outstanding high speed RAP1D0 series to thís renewed heavy-duty boxways ATLAS VMC, each
machíne fully reflects its extraodinary performance and dedication to pursue technologícal innovation. HIGH PRECISION  ACCURACY GUARANTE All machines manufactured under constant temperature
humidity controlled factory , DIRECT DRIVE ON THREE AXES COUNTER-BALANCE 3 axes class precísion ball screws, are GUIDE RAIL directly dríven through servo motors for The counter balancing system increasing acceleration. All axes are provided on Z-axis equipped with guide wíth rubber antí-bump devices provídíng rail to prevent vibration during protection for ball screws and bearings. Z-axís traverses rapidly. 07 4 B OX WAYS
ON RUGGED BED, SOLlD SUPPORT Special machine structure design wíth extra large column and base. Structural parts are analyzed by using Fimite Element Analysis. This combines wíth optimal ríb reinforcement in structural parts for upgradíng rígídíty and stability. Three axes are dírectly coupled and dríven by great AC servo power whích exhíbits outstandíng heavy cuttíng performance.
Box-shape slídeways on three axes combíned wíth extra-wíde
span between ways, makes the machíne ideal for heavy cuttíng
with maximum stabílíty. Q-15, Q-1 o only Z axis slideways were built into machine column wall and held by hardened ground steel block
from outside. This fíne structure reinforces the rigidity and the
accuracy of Z axis slideway at the same time.
ONE-PIECE FABRICATED LUBRICATION SYSTEM
MACHINE BED The lubrícatíon system employs 4 box ways on machine bed is a volumetric oil distributor. standard desígn. The box ways are oil hose breakage detection. hardened, precision ground and coated with wear resistance fílm for Consume less lubrication for
08 longer service lífe. environ ment-friend . DEPENDABILITY THROUGH RIGOROUS INSPECTION. Quality Assurance Department The outstanding machíne performance relies on
precision parts. To ensure each parts achíeves the
híghest accuracy and dependability, MAXIMART department conducts 100 parts inspection. This combines with the use of a full seríes of sophisticated Each spindle motor is subject to inspection instrument to ensure only best qualíty parts dynamic balance calíbration before fitted on all machines. it been assembled to machine, with CH this procese applied minimum spindle motor chattering and maximum machining accuracy can be achieved.
EMBLY/PRODUCTION FLOOR. 3-D spherical thermal dísplacement spindle checking. laser calibration Heidenhain ATC, under maximum
system ensure machíne double ball bar tool weight, for long
accuracy repetitíon. system, círcular test time operating test.
ADVANCED INSPECTION INSTRUMENTS ensuring machine
tool geometry. Three dimensional coordimate measuríng machine: Germany WENZEL 4-channel dynamic Circularity tester: Germany MAHR signal analyzer. To Ball bar tester: England RENISHAW inspect analyze spindle vibration Laser calibration system: HP, RENISHAW and make sure 3D thermal displacement tester: LOIN, spindle running at Spindle dynamíc signal analyzer: G-TECH, TAIWAN perfect conditions. Dynamic balancing calibrator for spindle rnotor G-TECH Circularity tester: Germany MAHR 10