Mazak Integrex IV multi tasking maschine

Mazak Integrex IV multi tasking maschine 

TM With a history of well over 20 years, a new era of Mazak multi-tasking begins. Featuring the newly developed MAZATROL MATRIX CNC, the fourth generation INTEGREX IV series provides you enhanced productivity and high accuracy machining. NEW, MAZATROL MATRIX INTELLIGENT THERMAL SHIELD INTELLIGENT SAFETY SHIELD ACTIVE VIBRATION CONTROL INTEGREX 100-IV Chuck size Maximum machining diameter Upper/Lower turret X/Y/Z/B axis travel Upper turret X2/Z2 axis travel Lower turret Tool storage capacity Upper/Lower turret Main spindle Second spindle Milling spindle INTEGREX Chuck size Maximum machining diameter Upper/Lower turret X/Y/Z/B axis travel Upper turret Tool storage capacity Upper/Lower turret Main spindle Second spindle Milling spindle INTEGREX 200-IV Chuck size Maximum machining diameter Upper/Lower turret X/Y/Z/B axis travel Upper turret X2 axis travel Lower turret Tool storage capacity Upper/Lower turret Main spindle 5000 rpm Second spindle Milling spindle INTEGREX Chuck size Maximum machining diameter Upper/Lower turret X/Y/Z/B axis travel Upper turret Tool storage capacity Upper/Lower turret Main spindle Milling spindle Chuck size Maximum machining diameter Upper/Lower turret X/Y/Z/B axis travel Upper turret X2/Z2 axis travel Lower turret Tool storage capacity Upper/Lower turret Main spindle Second spindle Milling spindle INTEGREX 400-IV Chuck size Maximum machining diameter Upper/Lower turret Tool storage capacity Upper/Lower turret Main spindle 30 min. rating Second spindle Milling spindle INTEGREX 400-IVT Chuck size Maximum machining diameter Upper/Lower turret X/Y/Z/B axis travel Upper turret X2/Z2 axis travel Lower turret Tool storage capacity Upper/Lower turret Main spindle 3300 rpm / AC 30 kW 40HP 3300 rpm / AC 30 kW 40HP Second spindle Milling spindle 20 ED 12000 rpm / AC kW 25HP 12000 rpm / AC kW 25HP INTEGREX IV series Available optional equipment to meet any requirement Gantry Robot System for extended hours of unmanned operation The gantry robot system is designed to realize unmanned operation from workpiece material input to output of the finished workpiece. A wide range of available specifications meets production requirements ranging from small lot sizes to mass production. INTEGREX FMS - state of the art multi-tasking system designed for unmanned operation featuring central control by an FMS computer. Advanced network technology allows remote monitoring of machine status, operation record results, and other data from an off-site computer. INTEGREX IV series Independently Developed by Mazak Machining that previously required more than 10 tools can now be performed by a single Flash-Tool. Since tool change cycles are minimized, machining cycle times are reduced as well as total tooling costs. OD rough turning ID rough turning OD thread cutting OD finish turning ID finish turning ID thread cutting Rough facing Finish facing Drilling and boring Milling hexagonal flats Finish facing Chamfering hexagonal flats OD taper turning OD rough turning Milling Rough facing Only one tool Helical machining - simultaneous drilling and boring In addition to KM tooling, the FLASH TOOL is available for CAPTO, BT-40, and BT-50 tool holders. Finished workpiece These processes normally require 12 tools Designed to minimize workpiece transfer time WORKPIECE TRANSFER HAND Complex workpieces machined by the first spindle can be transferred to the second spindle by the workpiece transfer hand mounted in the milling spindle and B-axis motion. INTEGREX IV series