Mep 250 Sawing machine

Mep FALCON 250, small manual pivot sawing machine to cut metals from 0° to 45° Ieft, using aп HSS blade.
Practical and safe to use, it can be supplied as a bench model or with the steel base, with three-phase oг single-phase speed motor.
A FEW FEATURES:
- Electric system: wiring totally identífiable, motor switch,low tension safetуΡ device (LTSD 24 V) with
1P55 control handle for the three-phase version and 1P55 control handle for the single-phase version.-
Metal blade cover which totally encloses the blade.
- Double head return spring.
- Bronze gear and casehardened/grounded worm screw which work immersed in oil.
- Vice with anti-burn device with double clamping of the piece.
- Electric submerged pump at 48 V to labor-refrigerate blade.
Adjustable stop to make cuts of the same length.
- The machine is supplied without saw blade.
Service keys and instructions manual for maintenance and spare parts list in the language of use.

FAICON 275, manual sawing machine to cut metals
from 45° right to 45° left usíng an NSS blade. This high performance mode7 has o heavy cast iron structure and is equipped with all the devices and functions necessary so as to cut in a precise and safe manner.
FALCON 275 is available as a bench model or eventually with the steel base. Furthermore it can be supplied with three-phase motor at one or two speeds.
A FEW FEATURES:
- Bronze gear mounted with key and ring nut so as to grant the maximum hold.- Worm screw shaft mounted on a pair of bushings.
-1P55 control handle.
- Clamping system 6y means of více screw which slides on taper slide with adjusta6le gib.
- Elechic submerged pump at 48 V to lubro-refrigerate blade.
- Double head return spring.
-Adjustable stop to make cuts of the same length.
- The machíne is supplied without saw 61ade.
- Service keys and instructions manual for maintenance and spare parts list in the language of use.