Mep 261 261HB Sawing machine

Mep 261-261 HB  PH 261, manual band sawing machine to cut from 0° to 60° left, supplied with HB system, too.
- PH 261 HB enables to make single cuts without operator, replacing the manual cut.
After positioning the baг and closing the vice, the cutting phase is storted, using the weight of the saw head controlled by a hydraulic circuit to adjust the descent speed; after the cut the band stops, the saw head is manually lifted till the posilion needed for the bar to advance and then is locked
By the manually-controlled hydraulic valve.
A FEW FEATURES:
- Adjustable stops at 0° and 60° left with clamping lever for in-between angles.
- Head pivoting with pre-loaded taper bearings.
- Vice with fast cIomping device.
- Electric pump for band lubrication and cooling.

WILLY 225, ѕmall sawing machine, bench model, with HSS blade, to cut from 0° to 45°1eh.
Model for hobbyists and fitters, entirely built in cast iron and available in 1 speed single-phase version.
A FEW FEATURES:
- Bronze gear and casehardened/grounded worm screw which work immersed in oil.- The head which swivels is locked by means of a screw so as to mitre cut.
- Control handle 1P55 with 20A microswitch to start/stop blade.
- Coolant system with mem6rane pump and coolant tank.
-Adjustable stop to make cuts of the same length.
- Service keys and instructions manual for maintenance and spare paгп list in the language of use.