Mep 422 SXIevo Semi automatic sawing machine

Mep 422 SXIevo Semi automatic sawing machine  
Shark 422 SX1 evo, semiautomatic, elecho-hydraulic sawing machine, to cut from 45° left to 60° right.
-Machine with controlled single oxis microprocessor with the latest generation of controllers for semiautomatic sawing machines designed by MEP.
- Semi-automatic cycle: starting the cycle: - the vice closes and the motor starts — the head goes down to execute cut — motor stops — head returns to top
position and vice opens.
- These machines are extremely versa6le (they can cut from 45° left to 60° right) despite their high cutting capacity (beams and solid pieces up to
420x300 mm at 00) and have 6een designed to make the cutting preparation steps easy.
A FEW FEATURES:
- Console with all centralized controls, installed on an articulated arm to follow the operator in every operating positon for the controls and the
EMERGENCY.
Low voltage soft keyboard, in polyester, with thermo-shaped buttons, with tactile feeling and
sound signal when operating.

- Display for the following messages: + diagnostic (messages in the use language) + alarms (cause description) + input and output stalus + cut counting
+ time spent for the cut made + blade motor
absorption + blade tension + blade speed + numeric displaying of the head position.
- The limits of the head stroke are programmed through the control6oard, depending on the
dimensíons of the bars to be cut.
- Latest generation hydraulic control unit, with high efficiency and low energy consumption.
- The bar support with rollers, on the left of the cutting table, slides on linear guides with ball
recirculation, so that it can be easily moved to cut up to the max. angles without any disassemblγ.
- Registered adjustable stops allow to stop and lock head rotation at angles of 0°- 45° left and 45°- 60° right.
- The head swivels on a rotating table with ro11er
bearings.
- Dual stage bevel geared motor to grant the maximum performance in trorısmission.
- Electronic inverter for the continuous adjustment of the band speed from 15 to 100 m/mi n.
- Steel band guides with adjustable hard metal plates which can be opened so as to make the blade replacement easier.
- Vice with fast sliding approach, movable on linear guides with ball recirculation.
- Pair of electro pumps for the blade lubrication and cooling.
- Coolant pistol to keep working surfaces clean,
- Chip tray, that can be replaced by an OPTÌONAL motorized chip evacuator.