Mep PH blue line Sawing Machines

Blueline MEP  PH 

Small portable bandsawing machine for hobbyists and fitters to cut at
o° up to 45 °(e ft.
Model ís realized completely ín aluminium die casting and ís
avaílable single-phase.
A FEW FEATURES.
- Brush motor ı800 W with electronic speed variator.
- Transmíssíon is gíven by double coupling of casehardened steel gears wíth helical teeth.
- Head swivels and is locked by means of a screw for mítre
cutting.
- Control handle with mícroswitch to start orstop blade motíon.
- Adjustable front band guíde so as to position ít accordíng to the
dimensíons of the material which is beíng cut.
- Bl-metal band.
- Adjustable stop to make cuts of the same length.
-lnstructions manual for maintenance and spare parts líst.

A FEW FEATURES:
- NEW sturdy structures ín cast íron, to tensíon the band at 700 and 900 kg respective(y for PH 211-1 and PH 261-1
2 - NEW movable pulley slide wíth two adjustable gibs to ensure
stiffness whi(e cuttíng.
3- NEW electric board wíth entirely ídentifable wíring, stand-by,
maín swítch wíth lock, short circuit protection, motor overload cutout, min. voltage coil,low voltage system
24 V.
- Control handle 1P55•
 4 - NEW drίving pulley locked with clamp ring to ensure a strong
fasteníng still allowíng axial adjustment.
5 - NEW blade-guíde heads with
6 CARB/DE pads instead of bearings for better stability.
- Stop strokes at o° and 600 on the left wíth lever for locking at any
intermediate angle.
- Head artículatíon wíth preloaded tapered bearings.
- Vice wíth fast locking lever.
- Stand wíth lubricatíng coolant tray.
- Electric pump for the band lubrication and coolíng.
 6- Brush band-cleaning device.
- Double spring for head return.
- Adjustable stroke for cuts of the same size.
- Bímetallíc band for profiles and solid pieces.
- lnstructions manual and spare parts líst.

Small sawing machine, bench model, to cut from o° up to 45°1eft.
Thís model, which ís forhobbyísts, is entírely buílt ín cast íron and is available ı speed
síngle-phase.
A FEW FEATURES:
- Bronze gear and casehardened/grounded worm screw which work ímmersed in oil.
- The head which swívels ís locked by means of a screw so as to miter cut.
- Control handle lP55 with mícroswítch to start/stop blade.
- Coolant system with membrane pump and coolant tank.
- Adjustable stop to make cuts of the same length.
- Servíce keys and ínstructions manual, for maintenance and spare parts list.

available (ín model 211-1 the HB devíce is available only ín the three phase version)
HB CUTT1 NG CYCLE
- After positioning the barand closing the více, the cutting phase ís started,
using the weight of the saw frame controlled by a hydraulic circuit to
adjust the down feed speed; after the cut the band stops, the frame is manually lifted till the position needed for the bar to advance and then is locked by the manually controlled hydraulíc valve