Mep Shark 410 CNC HS Automatic band sawing machine

Mep Shark 410 CNC HS, automatic band sawing machine, which can operate also in semiautomatíc mode, to cut at 0° structural steel, stainless steel and light alloys, solids and seconds up to 410 mm for rounds and 450x410 mm for rectangles.
A FEW FEATURES:
- CNC machine with multi microprocessor so as to obtain, on the same baг, 32 different lots each of different lengths and quantities.
- Console with all centralızed controls, ínstalled on an articulated aгm to follow the operator in every operating position for the controls and the
EMERGENCY.
- Panel with low tension controls: polyester mem6гоne keypad with tactile thermo-shaped buttons which give out an acoustic signal when pressed.
- Display to visualize technological parameters such
aѕ: + band speed + number of culs programmed and carried out + band thickness + length fed in each stroke + cutting time + ampero meter + band tensioning + diagnostics and/or caution messages (moгe than 100) visualized in the Ianguage of use.
- Cast iron saw head ensures a better cut control and a longer saw blade life.
- Saw head movement with Brushless motor and screw/nut with recirculating ballscrews.
- Saw head movement on linear guides with slides
with recirculating ball screws.
- Band rotation by means of a motor driven by a vector inverter so as to have a coп6пuouѕ adjustment of the cutting speed from 15 to 110 m/min.
- Dual stage bevel geared motor to grant the maximum performance in transmıssıon.
- SteeI bond guides, with hard metal rollers and plates. The band guides can be opened so as to replace the band motor easily. They are predisposed with nozzles for the coolant lubrication and tor the ѕpгay mist system (OPTIONAL).
- Feeding system by means of screw/nut with recirculating ballscrews and 100-mm stepper motor so aѕ to feed in bars up to a weight of 3000 kg and with a self-aligning vice so as to feed in also deformed bars.- Minimum restpiece which cannot
be fed in automatic is 100 mm.
- Monitoring soflware ѕo as to check value/ correct in real time: -sheańng stress - cutling torque - cutfıng deflection - band tension in comparison with programmed parameters.
- Laser team so as to position accurately y the bar for non-series and face cuts.
- Automatic гegulaбon of front band guide according to the dimensions of the material which has to be cut.
- Band rotation control with real time stop in case of locked tool.
- Motorized wire chip brush.
- Electromechanical actuator and dynamic control for the blade tensioning.
- Coolant tank inside the steel base and drawer to collect chips which can 6e replaced with a motorized chip evacuator (see optionals).