Millutensil am 04/06/08 die splitter

 Millutensil am 04/06/08  die splitter 
The die-splitter is used for splitting, adjusting, maintenance and try-out operations on progressive and transfer dies such as blanking, die casting, etc.
EASY AND SAFE MAINTENANCE FOR THE OPERATOR
The platens of the die-splitter are provided with 2 large cavities that allow the operator to reach the lower part of the die-half, allowing rapid assembly and disassembly
of the various parts of the dies.
ADVANTAGES
Remarkable reduction of assembly and maintenance times.
• Ergonomìc positions for performing work on the dies.
• Extremely easy dìe-handling.
CONSTRUCTION
The sturdy structure consists of a welded and normalized steel base.
LOWER PLATE
The lower plate travels on rails away from the columns for clear and open loading and unloading. At the ends of the rails is a 90 degree tilting option that tilts the lower die section to a vertical position for. An easy access to the front and back. After the die is loaded, the plate returns back to its initial position, mechanically and precisely stops
itself, to ensure precision opening and closing of the die halves and repeatability.

PRECISI0N UPPER PLATE
As the upper plate slides vertically by hydraulic actuation on the four guide columns and rotates 360 degrees by reduction gears, it is possible to put the upper die half in any work position to carry out the working operations.
Clamping of the upper plate in the exact horizontal position is performed using four hydraulically actuated locating pins.
CONTROLPANEL
Each button on the control panel is marked with a clear function. The PLC controls the sequence of movements and prevents from operator's mistake.
MACHINE CONTROLS — FUNCTIONS
• Pre-programmed SIEMENS S7 PLC and electronic controls.
• Digital control of the parallelism.
• Digital monitoring of the stroke.
• Digital monitoring of the pressure.
• Self-learning system for recording of the die-stroke.
• Diagnostic error search in two languages.
• Management of all die-splitter functions.
SAFETIES
Manufactured in accordance with CE and North America standards.