Miyano lz 01r cnc turning center

Miyano lz 01r cnc turning center

Fast loadíng due to moving spindle and automation.
These are high-precision chucking machines equipped with a general-purpose in-machine loader head. The loading time is shortened substantially through coordinated operation of the loader head and spindle. By constructing the turret with a single slide in the Y axis direction only 01 RY, and by assigning the X axis and the Z axis that runs on a linear guide to the spindle, both rigidity and high-speed travel are achieved.
The enriched system configuration designed based on the loader head
accommodates a wide range of automation needs.
Advantages
Roundness.
Dimensional accuracy.
Highly rigid turret high-rigidity spindle.
Machining of complex parts.

Machining examples
Conveyor system, bottom
2 Conveyor system, top (semí-standard)
3 Robot stocker System
4 System with part feeder underneath (semi-standard)

1 Maíntenance: Used to set ON / OFF for the maintenance items.
Used to set ON / OFF for turret zero point adjustment.
2 Curret maintenance: Used to adjust the turret zero point.

Kinematícs
The loader head and spindle operate in coordinatíon for loading/unloading, which means that the travel distance is reduced, and this helps to shorten machining time through high-speed loading with a loading time of 5.5 seconds.

Loader cycle
1 In the tooling zone: machining of the workpiece is completed.
2 At the loader side: the 1N hand grips a blank and carries it into the tooling zone.
3 The OUT hand receives the machined workpiece.
4 The spindle moves to the position of the IN hand and receives the blank from the IN hand.

Híghly rigíd turret
combining an original double-column type Y-axis mechanism (01 RY) with a turret slide on the Y-axis only instead of hauing X-axis and Z-axis slides enables high-precision machining in turning work.

Hígh-rígídíty spindie and roller type línear guide
Adopting a linear guide for the Z-axis allows increased speed, with a rapid traverse rate of 24 m/ min. And because a rolleг type linear guide is used, the rigidity is equivalent to that of a square slide