Proma Grinding SC CNC Cylindrical roll grinder

Proma CNC Cylindrical Roll Grinder
ALL the headstock & front base, carríage are cast in high strain casting up to FC30 - FC35.
Ríbs of the base are designed wíth cellform to get stabílíty & rígidness .
THE guídeway are lubricated by hydrodynamíc & static lubrícatíon -system to get smooth motion and low fríctíon occur between base & table.

The spíndle ís made by Ni-Cr-Mo alloy steel with precise grindíng Whích was lnstalled into
hydrodynamíc bearíng to get precíse rotary & non-wear pertormance.
The wheel head ís mounted on the gríndíng support adjust (carriage ) dírectly and lubrícated by hydrodynamíc & statíc lubrícate -system The pulley on the spíndle are pulled wíth índírect to avoid ít to get strain from the motor..

DRIVE by varíed frequency motor whích offer the headstock varíed speed wídely.
AIR-DYNAMIC DEVICE on the bottom of the headstock for easy to move ít .
SPRING DRIVEN-DOG to ensure the workpíece to get smooth runníng.

The wheel-dressíng devíce ís mounted oп the tailstock to dress the edge & face of the wheel by program.
AIR-DYNAMIC DEVICE on the bottom of the tailstock for easy to move ít. Adjustíng the bottom of the tailstock directly for the workpiece alígnment. (The revolution type wíth 4 jaws chuck is optíon only)

The FANUC CNC-controlier ís applied to develop the roll gríndíng process automatícally.
The system is configured wíth a humanízed operatíon panel for user Whích made the gríndíng operatíon
became easy and precísíon.
All the operator need to do just call a cuttíng program from memory to performed the grínding sequentíally.
The crown gríndíng is also easy to get whích include base arc curve SINE curve COSINE curve CVC curve and combined arc curve.
The camber values was assígned by the program.
The system have íntegrated a net functíon for output & ínput Of the data of the cuttíng & the parameter of machíne or maíntenance.