Nakamura WT 150II multitasking turning center

The Best-sellíng nakamura Multí-Turret Type Multítaskíng Turníng Center

WT - 150II
High-Speed, High-Rigidity Compact
Multitasking Machine wт-і5on
Hígh-effícíency spíndle motor
♦ spindle nose : A2-5 / A2-6 (op.)
♦ Least input increnıent:0.001°
♦ C-axis rapid speed : 600miп'
♦ C-axis synchronous control

Hígh-ettícíency spindle motor
♦ Spindle nose:A2-5
♦Least input increment : 0.0010
♦ C-axis rapid speed : 600min'
♦ C-axis synchronous contro

Hígh rígídíty Y-axís slíde
The Upper machine-structure was designed with the Y-axis in mind. High rigidity of the machine ensures maximum stability during heavy duty turning and milling with full power

3 way slide
Upper and lower index units, as well as right spindle unit are mounted on individual saddles, so they can move freely without limitations

• Wíde and very rigid slídes for Z-axís slíde
The upper Z-axis slide was designed in the direction of gravity to avoid any load
unbalance.

Cutting Sectional area : 3.6mm2
Cutting Depth : 6mm
Feed : 0.6mm/rev
Spindle speed : 1270min'
Load : 140%
Material : S45C (J1S)
Cutting Sectional area : 2mm2
Cutting Depth : 5mm
Feed : 0.4mm/rev
Spindle speed : 1270min'
Load : 140%
Material : S45C (J1S)

Cutting Sectional area : 3.3mm2
Cutting Depth : 6mm
Feed : 0.55mm/rev
Spindle speed : 1270min'
Load : 137%
Material : S45C (J1S)
Cutting Sectional aгea : 2mm2
Cutting Depth : 5mm
Feed : 0.4mm/rev
Spindle speed : 1270min'
Load : 135%
Material : S45C (J1S)

Muili-point Machining
A wide range of parts can be machined from bar stock, bianks or forgings
■ WT-150Il
Sίmultaneous machining with synchronized left and right spindles contribute to faster cycle times.

From simple to complex parts
One hít machíning from raw material to finished part
In addition to milling or drilling simultaneously with upper and lower turrets,
improved chip-removal capabilities contribute to drastícally faster cycle timés

Maín features of NT SmartX

•NT Work Navigator
• Airbag (Overload detectíon)
• NT Nurse function
• Status Dísplay Function
• Setup Display
• Trouble Guidance
• Productivíty Functíon
• Warm up Functíon
• Tool spindle loadíng Operation function
• Parts catcher G Operation Functíon
• NT Machine Símulation
• NT collision Guard
• NT Multítasking Office (op.)
• NT Thermo Navigator A1
• NT Smart Sign
• Digital chuck ínterlock
• One touch MDIfunction

Dígítal Chuck lnterlock
Set the detection position of open end and closed énd of chuck arbitrarily.
The chuck open / close positions set on the NT Smart X screen.setup time and machining cycle time are reduced.

One Touch MDI
This function is to register in advance frequently used cycle
programs such as home position return and cool exchange, and call with one
touch.
Cut in check
• Windows 8.1
• Touch pad
• USB 2.0 Port rr2
Reduce programming and setup time, while eliminating input errors.

NT Thermo Navígator AI
Thermal Growth
Compensation using AI.

Powered by AI
Time and measured dimension data and input into a dedicated AI
Learning software, to build an optimized thermal growth compensation model.

High Precision Thermal Growth Compensation
The compensation value is cªlcuated from acquired data.
The more data is input, the more -accurate is the compensation value. 

WT-150II
Double safety features for maximum protection
The machine is protected with dual safety features
+ Airbag J NT Machine Simulatioп / NT Collision Guard" prevent collision beforehand,
and the "Airbag Function" minimize damage to the machine in case of collision.
NT Machíne Símulation is for Vírtual Collísion Checkíng of NC Programs without axís movement.

By checking in advance the chuck and the tool, the tool and the cover, etc .
and checking the machining process etc , the risk of a machine collision when actually moving the machine can be reduced. It can override the settings for a feed and cutting feed individually.

Airbag (Overload detection)
Compared to other machines, Nakamura-Tome machine will not break after the stightest collision. The "Airbag Function" minimizes the damage that may occu( during a collision.
If a machine collision occurs, there is good reason to be assured: Airbag 1
When the machíne collísíon,there ís no reason to panic.
Nakamura-Tome is...
The Airbag (Overload detection) of the machine tool greatly reduces the impact of a collision, and protects the machìne

Machining parts with  non-round shapes, such as requíred
forgings or castings requires that the raw part coordinates be
ecognized by the CNC control.
In order to achieve this without requiring extra cost or additional options. the NT Navigator is used.
It works just by touching the part with a simple inexpensive probe (mostly round bar mounted on a tool holder) and using the torque control feature of the servo-motor, which is to record required coordinates in the CNC The NT Navigator is a cost-cutting feature in multitasking
machines, eliminating the need for positioning lixtures and special clamping devices.