NKO machines UZ 50 unique double sided beveler

NKO machines UZ 50 unique double sided beveler 

Uníque double sided beveler (max. wídth of bevel 62 mm)

The beveler UZ 50 — very effícíent, uníque double síded bevelíng machíne for steel, staínless stell, HARDOX, DOMEX and alumínium.
■ automatic feeding, automatic feed speed adjustment with inverter, 0-1,2m/min
 high speed milling head with very resistant inserts, max. width of bevel 62mm/15°, 50mm/45°
■ 15-60° infinitely variable angle, without replacing any parts
 Material thickness 7— 70 mm
■ the electric circuit is enclosed in a dust proof box and is equipped with all the safety devices necessary.
 CE conformity declaration
■ unique MANIPULATOR 3D — manipulator provides a simple quick turn UZ50 of 180° to create double sided bevel X K. The operator does not need a crane to rotate the material. There is a significant saving of work time.
■ the unique clamping system allows the machine UZ 50 to be assembled and disassembled (Quick System) within a few seconds without using any tools
 the beveler UZ 50 is "floating" oп MANIPULATOR 3D and compensates the unevenness of the floor or the deformations of the steel plate.
 MANIPULATOR 3D allows the easy manipulation with beveler
 the required height of the machine can be set up by MANIPULATOR 3D by lift handle
■ the movement of the machine is provided by massive wheels mounted on the carriage
 the possibility to bevel with MANIPULATOR 3D or without
 the possibility to use the MANIPULATOR 30 like a stationary station
 EQUIPMENT for bevelling small flat steel
 Equipment is intended for use with the machine UZ50
 With the equipment is machine UZ50 possible use for processing sma11 workpieces
■ The machine UZ50 maintains a continuously adjust the bevel angle between 15°- 60°
Technical data:
Material specifications:
thickness of material:
minimum dimension of material:
maximum dimension of material:
Engine milling head:
cutting speed:
milling head:
Engine automatic feeding:
Machine weight
UZ 50 + MANIPULATOR 30:
for bevelling carbon steel, stainless stell and aluminium from 7 to 70 mm
200 x 100 x 7 mm, wíth equípment for bevelling small flat steel unlimited
power 4 000 W/ 400 V/ 3 phases / 50 Hz
182,92 m/min
85 mm with 5 inserts
2x engine, power 120 W/ 400 V/ 3 phases / 50 Hz,
automatic feed speed adjustment with inverter 0-1,2 m/min, adjustment depends on cutting conditions
175 kg
EQUIPMENT for bevellíng small flat steel - A
Technical data:
Table size: 700 x 200 mm
Working height: 914 mm
Weight (without machine): 30 kg
Smallest possible size workpiece: 200 x 100 x 7 mm
bevel angle a: 15-60° infinitely variable