Omera Universel trimming and beading machine

Omera  Universel trimming and beading machine  

A 1.1 COOKING POT
Materíal: staínless steel / 0.8 mm thick
Working measurements: Ø 300 mm
Performed operatìon: edge trimmíng and curling
Working lime: approx. 7 sec.

A 1.1 DEEP COOKING POT
Material: mild steel / 0.8 mm thíck
Working measurements: Ø 360 mm
Performed operation: edge trimmíng, deburring and curling
Working time: approx.17 sec

A 1.1 PRESSURE COOKER
Materíal: staínless steel / 0.8 mm thíck
Working measurements: Ø 220 mm
Performed operation: neckíng, trímming, deburring and curling
Working time: approx. 18 sec.

A 1.2 POT L1DS
Material: alluminium, stainless steel 10.6 +1.0 mm
thíck
Working measurements:100+300 mm
Performed operation: beading, trímmíng, deburring
Working time:l0 sec. (Ø 100)

A 1.3 OVAL TRAY
Material: stainless steel / 1.0 mm thíck
Performed operation: trímming and beading
Working time: approx. 20 sec.

A 1.3 SECTIONED FOOD TRAY
Materíal: staínless steel / 0.6 mm thick
Working measurements: approx. 470 x 380 mm
Performed operation: edge trímmíng and curling
Working time: approx. 45 sec.

A 1.3 ROUND TRAY
Material: stainless steel / 0.5 and 0.8 mm thick
Working measurements: Ø 260-375 mm
Performed operation:
edge trimmíng and curling
Working time: approx.12 sec.

A 1.3 POLYGONAL TRAY
Material: staintess stee111.0 mm thíck
Wo king measurements: approx 352 x 170 mm
Performed operation:
edge trímming and curling
Working time: approx. 30 sec.

A 1.4 COOKING PAN
Material: stainless steel / 0.8 mm thíck
Working measurements: Ø 200 mm
Performed operation: edge trimmíng and curling
Working time: approx. 8 sec.

A 1.4 SAUCEPAN
Material: stainless steel /1.0 mm thíck
Working measurements: Ø 300 mm
Performed operatíon:
edge trimming, deburring, and curling
Working time: approx.14 sec.

A 2.2 KETTLE
Material: staínless steel / 0.8 mm thíck
Working measurements: Ø 206 mm
Performed operation:
bottom plate trimmíng, and lockseamíng the plate and main body together
Working time: approx. 15 sec.

A 2.3 THERMOS
Materíal: stainless stee1l0.5 mm thíck
Working measurements: Ø 100 mm
Performed operation: trímming - beading
Working time: 5 sec.

B 1.1 COOKER TOPS
Material: stainless steel / 1.0 mm thíck
Working measurements: 600 x 600 mm
Performed operation: trimming - flangíng
Working time: 20 sec.

B 2.1 FRONT PLATE OF A
WASHING MACHINE DRUM
Material: stainless steel / 0.6 mm thíck
Working measurements: Ø 260 mm
Performed operation: outward semi-curling of the inner edge
Working time: approx. 8 sec.

B 2.2 WASHING MACHINE TANK
Material: staínless steel / 1+ 1.2 mm thick
Workíng measurements: Ø 800 mm
Performed operation: pre-curIing -lock seaming - flattening
Working time: 40 sec.

B 3.1 COMPRESSOR SHELLS FOR
REFRIGERATORS
Material: mi1d steel/l1.5 mm thick
Working measurements: Ø 160 mm
Performed operation: opening
Working lime: 60 sec.

C 4 MICROWAVE OVEN SHELL
Material: mild steel / 1.0 mm thick
Working measurements: approx. 520 x 305 mm
Performed operation:lockseamíng the front and back plates onto the main body, in two
separate place settings, utilising the same basic tooling
Working time:
approx. 30 sec. for each place setting

D 1.3 PETROLEUM BURNER BODY
Material: mild steel / 0.7 mm thíck
Performed operation: lockseaming the two halves together
Workíng time: approx. 24 sec.

D 2.1 OUTER SHELLS FOR
OUADR. WATER HEATERS
Materíal: mild steel l 0.7 mm thíck
Working measurements: ф450 mm
Performed operatíon: trímmıng - beading
Working time:l5 sec.

D2.2 CASING CAPPING PLATE
FOR CYL. A WATER HEATER
Materíal: mild stee110.8 mm thíck
Working measurements: Ø 580 mm
Performed operatíon: edge trímmíng, ribbIng
Working time: approx. 7 sec.

E 1 A1R DUCT
Materíal: mild steel / 0.6 mm thick
Working measurements: Ø up to 300 mm
Performed operation: edge shapíng and
fianging outwards, posítioníng a rubber gasket on it, and bеndіng and fIattening the
edgeto enclosethe gasket

E 1.1 AERATION P1PES STRAIGHT
F1TTINGS
Materíal: mild steel / 0.6 mm thick
Working measurements: Ø 80 + 300 m m
Performed operation: see AR 966
Working time: 20 sec.

E 1.1 AERATION P1PES
REDUCTION
Material: mild steel / 0.6 mm thíck
Working measurements: Ø 80 = 300 mm
Performed operation: see AR 966
Working time:l2 sec.

E 1.2 A1R DUCT BENDS
Material: míld steel / 0.9 mm thíck
Working measurements: Ø 316 mm
Perfomıed operation: see AR 966
Working tíme: approx. 8 sec. for each place setting

E 1.3 AERATION P1PES'T'
F1TTINGS
Material: mild steel / 0.6 mm thíck
Working measurements: Ø 80 = 300 mm
Performed operation: see AR 966
Working time: 20 sec:

E 2.1 FLANGED DRUMS
Material: mild steel / 5 mm thick
Working measurements: Ø max 1800 mm
Performed operation: fIanging -turning - beadíng
Working time: 160 sec.

F 1.2 MOTOR CAR WHEEL CAPS
Materíal: mild steel/0.9 mm thick
Working measurements: Ø 240 mm
Perfonned operatіon: edge timming and curlíng 
Working time: approx. 8 sec.

F 1.2 MOTOR CAR WHEEL CAPS
Material: stainless stee1l0.5 mm thick alumínium 10.8 mm thíck
Workíng measurements: Ø 240 and 200 mm
Perfom ed operatIon: edge trimmIng and curfing
Working time: approx.10 sec. and 6 sec.
respectívely

F 2.1 CYL. MOTOR VEHICLE
SILENCER
Material: mild steel / 1.5 mm thíck
Working measurements: Ø 100 mm
Performed operation:lockseaming the end plates onto the maín body, in two separate
place settings, utilísing the same toolíng
Working time: approx. 8 sec. for each place setting

F 2.1 OVAL MOTOR VEHICLE
SILENCERS
Material: mild steel / 1.0 - 2.0 mm thíck Performed operation: lockseaming the end
plates onto the main bodies, in two separate place settings, utilising the same toolíng
Working time: approx. 7-25 sec. for each place setting, depending on the shape of
the workpíece.

F 2.2 O1L FILTERS
Material: mild stee1l0.8 mm thíck
Working measurements: Ø 180 mm
Performed operation: semi-curiing - flattening
-lock seamíng
Working time:l0 sec.

F 2.3 UPPER SECTION OF A MOTOR VEHICLE RADIATOR SHELL
Material: brass / 0.6 mm thick
Working measurements: approx. 460 x 70 mm
Performed operation: trímmíng
Working time: approx. 8 sec.

F 2.6 SEAT FRAMES
Materíal: mild steell1.0+1.2 mm thick
Working measurements: 900 x 400 mm
Performed operation: trímming - beading
Working time: 50 sec.

Material: staínless and mild steel/ 1.2 mm thick
Performed operation: Iockseaming the two parts of the component together (one of
stainless steet, the other of mild steel)
Working time: appгox 35 sec.

F 2.9 HEADLIGHT NUT
Material: mild stee1l0.6 mm thick
Working measurements: Ø 225 and 160 mm
Performed operation: trímmíng and beadíng
inwards of the outer edge
Working time: approx. 5 sec

G 1 TANK BOTTOM ENDS
Material: mild steel/ 2.6 mm thick
Working measurements: Ø 450 + 1200 mm
Performed operation: trimmíng - beadIng - turning
Workíng time: 25 sec.

G 3 GAS BOTTLE
Material: mild steel/l3.0 mm thick
Working measurements: Ø 310 mm
Pedormed operation: (A) trímmíng only l(B) beadíng and trímming the two halves
(automatically aIternating the processes)
Working tíme:
(A)appгox.4 sec./(B)appгox.9 sec.

G 4 FIRE EXTINGUISHER BODY
Material: mild steel/1.5 mm thíck
Working diameter: 120 mm
Perfomed operation: (A) trímmíng only /(B) beadíng and trimming the two halves
(automatically alternating the processes)
Working time:
(A) appгox. 3 sec. /(B) appгox. 6 sec

Material: mild steel/0.6 mm thick
Working measurements: approx. 376 x 196 mm
Perfoгmed operation: lockseaming the two halves together
Working time: approx. 20 sec.

G 6 NUCLEAR WASTE CONTAINER
Material: stainless steel / 2.3 mm thíck
Working measurements: Ø 800 mm
Performed operation: trimming - ribbíng
Working time:120 sec.

G 7 SPRAY GUN BOTTLE
Materíal: aluminíum / 1.5 mm thick
Working measurements: Ø 65 mm
Perfomed operation: neck treadíng
Working time: approx. 4 sec.

Material: stainless steel / 1.5 mm thick
Working diameter: 580 mm
Pedoгmed operations: edge trimmíng and double body ribbing, done by the same workIng unit in one cycle
Working time: appгox. 7 sec

G 8 EXPANSION TANK
Material: mild steel / 1.2 mm thíck
Working diameter: 220 mm
Perfom ed operation:lakseaming the two halves together, clamping the inner rubber sheath inbetween
Workíng time: approx.15 sec.

G 8 EXPANSION TANK
Material: mild steel/1.5 mm thick
Working measurements: approx. 495 x 208 m m
Perfomıed operation:lakseaming the two halves together, clamping the inner rubber
sheath ín between
Working time: approx. 75 sec.

H 1 BUCKET
Material: mild steel l 0.3 mm thíck
Working measurements: Ø 266 and 215 mm
Performed operation: ribbíng the main body (two ríbs), curling the upper edge of bucket,
and lock seaming the bottom plate onto main body (all the operations done in a single place setting)
Working tíme: appгox.15 sec.

H 2 ANIMAL FEED PAN
Material: mild steel / 0.8 mm thíck
Working measurements: Ø 380 mm
Performed operation: edge trimming, foldíng over, and wrinkling
Working time: approx. 8 sec.