PDG CS Punching unit

PINCHART DENY GRIMAR
MULLERMATIC
Punching unit Mode/ TM 15 ; throat 200 mm for max. Ø 15 mm or for any other form
containing in a circle of 15 mm Ø; max. thickness of material 4 mm.

Punching unit Mode! TM 22 ; throat 200 mm for max. Ø 22 mm or for any other form
containing in a circle of 22 mm Ø; max. thickness of material 4 mm.

Punching unit Mode/ TM 22 ; throat 500 mm for max. Ø 22 mm or for any other form
containing in a circfe of 22 mm Ø; max. thickness of material 4 mm.

Punching unit Mode/ TM 50; throat 200 mm for max. Ø 50 mm or for any other form
containing jn a circle of 50 mm Ø; max. thickness of material 4 mm.

Punching unit Mode/ TM 50; throat 500 mm for max. Ø 50 mm or for any other form
containing in a circle of 50 mm Ø; max. thickness of material 4 mm.

Punching unit Model TM 80 ; throat 200 mm for max. Ø 80 mm or for any other form
containing in a circle of 80 mm Ø; max. thickness of material 4 mm.

Punching unit Model TM 80; throat 500 mm for max. Ø 80 mm or for any other form
containing in a circfe of 80 mm Ø; max. thickness of material 4 mm.

Punching unit Mode/ TM 120 ; throat 200 mm for max. Ø 120 mm or for any other form
containing in a circle of 200 mm Ø; max. thickness of material 4 mm.

Punching unit Mode/ CS 14; throat 200 mm for max. Ø 14 mm or for any other form
containing in a circle of 14 mm ø; max. thickness of material 5 mm.

Punching unit Model CU and CS 24; throat 200 mm for max. Ø 24 mm or for any
other form containing in a circle of 24 mm ø; max. thickness of material/ 6 and 12 mm.

Punching unit Model CU and CS 50; throat 200 mm for max. Ø 50 mm or for any
other form containing in a circ/e of 50 mm ø; max. thickness of material 6 and 12 mm.

Punching unit Mode/ CU and CS 50; throat 500 mm for max. Ø 50 mm or for any
other form containing in a circle of 50 mm Ø; max. thickness of material 6 and 12 mm.

Punching unit Model CU 100 ; throat 200 mm for max. Ø 100 mm or for any other form
containing in a circle of 100 mm Ø; max. thickness of material 10 mm.

Punching unit Model CU 200 ; throat 200 mm for max. Ø 200 mm or for any other form
containing in a circle of 200 mm Ø; max. thickness of material 10 mm

Notching unit E 40 for 40 x 40 mm. Max. thickness 8 mm.

Notching unit G 150 for 150 x 150 mm. Max. thickness of material 8 mm.
Punching and Notching units for diameters up to 200 mm oг for any other form
containing in a circle of 200 mm Ø; foı thickness of material up to 12 mm.
Notching up to 150 x 150 mm. Max. thickness of material 8 mm.