Pilous band saw

Pilous band saw

CTR 500
CTR 700
Max. log diameter
Saw blade stroke 
Cutting length of basic version
Extension section
Driving wheel motor
Motor of vertical feed 
Motor of horizontal teed 
Machine length basic version
Frame width
Max. height
Max. width
Saw band
CTR 500 Horizontal and vertical band saw arm feeds are hand operated
Simple to operate an extraordinarily sturdy construction of the band saw arm with cast iron wheels and the overall sturdy machine design provide for the maximum precision of the cut, a high cutting power, long life of saw bands and the whole machine. Accessoriers Vertical log lifting mechanism Log turning mechanism. CTR 700 Electronically controlled horizontal and vertical band saw arm feed with continuously adjustable velocity on the frequency converter arranged on the control desk. It also enables a continuous change of velocity during the cutting depending on the character of the log being cut. The velocity is continuously shown on the display of the frequency converter. The control desk is located on a travelling bridge of the band saw arm or in the CTR 700 model it is in a stationary position on the machine frame enabling the control from one spot an extraordinarily sturdy construction of the band saw arm with cast iron wheels and the overall sturdy machine design provide for the maximum precision of the cut, a high cutting power, Iong life of saw bands and the whole machine. Aceѕsories Digital measurement of plate thickness lncision equipment. Vertical log lifting mechanism log turning mechanism Band Saw Sharpener. The sharpener is used for sharpening band saws with abrasive disks The whole sharpening cycle the feed and the tooth sharpening are carried out by a single movement of the lever between the adjustable end of travel positions very quick and simple operation. EnabIes sharpening of all tooth types Space saving as a result of the vertical position of the sharpened band saw. Band Saw Sharpener. The sharpener is used for sharpening band and disk saws in a semi automatic cycle. The change of pitch and profile of the sharpened teeth is done by hand. The abrasive disk and the feeding mechanism of the saw band disk are driven by electric motors the sharpening is automatic. The sharpener is equipped with a pump for cooling band saws during sharpening. 180 Band Saw Sharpener. The sharpener is used for sharpening band, frame and disk saws in a semi automatic cycle. The change of pitch and profile of the sharpened teeth is done by hand. The abrasive disk and the feeding mechanism of the saw band are driven by electric motors the sharpening is automatic. Own saw dust extractor. Saw setting Equipment. it enables a quick and easy setting of band saw teeth. By the backward lever movement two teeth are alternately set to the right or the left side 
By the forward lever movement the band is moved by next two teeth or one tooth is passed and the next two ones are set 
The sturtly cast iron design guarantees a long life of the machine and a precise tooth setting.