Poreba TRP93 TRP 110 Centre lathe

CENTRE LATHES TRP 93 AND TRP 110
Two models with 930 mm and 1100 mm swing over bed.
Up to 20000 mm distance between centres.
Exceptionally stable machine with bed supported continuously on its whole length. Maximum weight carried between centres without steadies with two steadies
duty cycle spindle drive motor 2 speed. High torque 6000 Nm at the spindle for machining with high metal removal rates. 21 spindle speeds within 8 800 rpm range available as standard, other ranges as option. Hardened and precision ground bedways. lnch metric threading without quadrant gear changes. Feed drive system with magnetic clutch and feed reverse mechanism incorporated in apron. Power driven feeds available for carriage, cross slide and top slide. Rigid tailstock with 130 mm dia. quill and two different transmission ratios for hand operated quill traverse. Carriage equipped with quick disconnecting coupling for moving tailstock along the bed. Handy push button control panel located at the apron. Special versions of the lathe with 200 mm or 320 mm spindle bores. Spindle noses at both ends of the spindle also available. Swing over saddle mm 630 830
Complete coolant system
Distance between centres mm 1000 20000 Lighting installation with worklight
Maximum weight carried Travelling splash guard
between centres without steadies kg 6000
Chuck guard
with one steady kg 7600
Lead screw and feed rod rests
with two stedies kg 9200
for lathes over 3000 mm
in the chuck 1000
2 dead centres MT6
Width of the bed mm 585
spindle Electrical equipment for voltage different than standard
Bed with gap lnch versoin
Constant surface speed available only with digotal readout CNC versions
All specifications are subject to change without notice
Manufacturer Exporter