Repar 2 VT Safety devices for machine tools

Repar 2 Safety devices for machine tools

SAFETY DEVICES FOR TURNING MACHINES
Mod. TF 
Polycarbonate screen for lathe, steel frame and safety microswitch.
Mod. TFM
Concept same as mod. TF but coith full metal screen and safety microswitch.
All support uníts are províded wíth an adjustabfe clutch.

Mod. POL
Protection screen for lathes, made of steel-sheet, with, farge windo of Polycarbonate wíth safety microswitch.

Mod. IE
Protection screen for lathes, made of steel, Polycarbonate or laminated glass, wíth safety microswítch.
All support units are provided with an adjustable clutch.

Mod. TC 1/2/3
Mobile and swivelling safety guard to be fitted on the longitudinal carriage of the lathe. Steel frame with polycarbonate screen.
Protection of operator against chips and coolant. Avaílable either with or without cooling system and microswitch system. To be fitted on the rear side.

Mod. TC 4/5/6
Mobile and swivelling safety guard to be fitted on the longitudinal carriage of the lathe. Steel frame with polycarbonate screen. Protection of operator against chips and coolant. To be fitted on the front side.

Mod. MINOR AER
Mod. MINOR SPECIAL
Safety enclosure sliding on ball guides, to be fitted oп the lathe's headstock. Made of steel-sheet. The upper and the front sides are provided with large windows with polycarbonate screens to facilitate visibility into the work area.
Complete with microswitch system

Mod. MAJOR 
Safety enclosure sliding on ball guides, for application on headstock of lathe. Made of steel sheets wíth polycarbonate screen.
Complete wíth microswítch. Suitable to any kínd of lathe due to double positioning possibility

Mod. MINOR AER L
Mod. MINOR SPECIAL L
Safety enclosure slíding on ball guides, to be fitted on the lathe`s headstock.
Made of steel sheet. The upper and the front sides are provided with large windows with polycarbonate screens to facilitate visibility into the work area.
Complete with microswitch system and slidíng halogen lamp.
Mod. TP
Safety guards for lathes with medium-sized chucks or tab/ea. Steel frame with double hinges for tilting, complete with mícroswitch.

Mod. AM
Protection screen for lathes, sliding on ball guides, made of steelsheets, with safety microswítch. Sízes on request

Mod. LA
Side protection screen for chucks, made of steel-sheets, with safety microswitch. Single and double. Sizes nп request.

Mod. POST
Fixed safety guard for lathes to be fitted at the rear of the machine.
Steel frame with polycarbonate screen. Protection of operator against chips and coolant. Suitable to any kínd of turníng machine.
Sizes on request .

Mod. AB
Rear safeguard for lathes, with steel frame and shockproof transparent grate to protect
against chips and coolant. Adaptable for any kínd of lathe. Provided with wheels. Dimensions on request.

Mod. SD
Sliding safeguard, made of tubes and Polycarbonate, mounted on rear protection, frame provided with microswítch on Chuck Guard.
Sizes on request.

Mod. AR
Pair of safeguards of roller-blind type for lathes to shíeld the leadscrew/bars

MOD. LE
Double safety levers under headstock and carriage - COD.ARTLE/2
Single are also available - COD.ART.LE

Mod. PT
Safeguard for lathe with vertical aгm lifting, adjustable in heíght and lenght, with gas spring and safety microswitch.

Mod. OM 
Transparent screen to ensure good protection against chips and splinters.
Can be position easíly near to any machine tool. Standard modules available. On request, dífferent sizes can be made

Mod. CSA
Safety key for chucks, with automatic ejectíon.
Squares from 9 to 15 mm available

Mod. FI
Swarf hook.

Mod. PED
Electric safety device for machine stop, model PED

Mod. FT
Safeguards for milling machine to be fitted to the machine table, wíth microswitch. Easy and quick application for the protection of the operator against chip projection. Machine start prevented when safeguard is open.
Provided with double protection wall made of polycarbonate, adjustable in height.

Mod. FT/M
Safeguards for milling machine to be fitted to the machine table with space for application of clamping vice, with microswitch. Easy and quick application for the protection of the operator against chíp projection.
Machine start prevented when safeguard is open. Provided with double protection wall made of polycarbonate, adjustable in height.

Mod. FB
Arm without balancing, provided with 2 safety microswitches. Available with or
without lamp (20 W) and right or left fixing.

Mod. FBB
Safeguards for mílling machine havíng threefold Safety microswitch. Fitted to an
articulated arm, 6alanced and kept in position by gas spring, with steel-pipe and
polycarbonate hood. Available with or without lamp (20 W) and right or left fixing.

Mod. FA
Arm without balancing, provided with 2 safety microswitchea. Available with or wíthout lamp (20 W) and right or left fíxíng.

Mod. FAB
Safeguard for milling machine having threefold safety micro-switch. Fifted to an
articulated arm, with articulation of chromeplated steel pipe, balanced and kept in position by gas-spring. Available wíth or without lamp (20 W) and right or left fixing.

Mod. BF
Arm without balancing, provided with two safety microswitches, screen made of stee/ and Polycarbonate oг laminated glass. Available with or without /amp (20 W) and ríght or left fixing

Mod. BBF
Safeguard for milling machines with threefold safety microswitch, mounted on articulated aгm, balanced and supported on gas spring, with screen made of steel and Polycarbonate or laminated glass.Available with or without lamp (20 W) and right or left fixing

Mod. AF
Arm without balancing, provided with two safety microswitches, screen made of steel and Polycarbonate or laminated glass.
Available with or without lamp (20 W) and right or left fixing.

Mod. BAF
Safeguard for milling machines with threefold safety microswitch, on articulated aгm, with steel tube articulation, balanced and supported gas spring, wíth screen made of steel and Polycarbonate oг iaminated glass. Available with or without lamp (20 W) and right or left fixing.

Mod. TA
Safeguard for bed-type milling machíne with mícroswítch, to be fitted to the machine table. Steel frame wíth shockproof transparent screens. Dímenslons: length and width on request;
height 300-400-500 mm.

Mod. TA Sliding 
A sliding door with micro

Mod. FV
Mod. FVH
Integral safety enclosure sliding vertícally for mílling machine. Made of pipe structure and polycarbonate screens. Side panels slide and can be posítioned. Complete wíth microswitch system which stops the machíne when safeguards are open.
Available in sizes from 700 to 2000 mm

Mod. FR
Tiltable safeguard for horizontal milling machine, easily fitted. Made of transparent material, complete with micro-switch, to be fitted to the machine slide.

Mod. PS/1 
Safeguard for sawing machine, consisting of a pair of transparent tiltable shockproof screens
and complete with microswitch system.

Mod. PR/3
Universal safeguard, made of steel with mobile wing(s), shockproof transparent screen and safety microswitch.

Mod. PR
Universal safeguard made of steel with single shockproof transparent wíng, with a safety microswitch

Mod. TR6 
Safeguard for drilling machine with polycarbonate sheets, adjustable ín height, complete with safety microswítch.

Mod. TR5
Safeguard for drilling machine wíth polycarbonate sheets, adjustable in height, complete with safety microswitch.

Mod. TR2 
Safeguard for drilling machine with polycarbonate sheets, adjustable іn height, complete with safety microswítch.

Mod. TR7
Safeguard for drilling machine with polycarbonate sheets, adjustable in height, wíth stroke 150mm, complete with safety mícroswitch.

COD. ART. TR2 SP
Safeguard for drillíng machine with polycarbonate sheets, adjustable in height, wíth support 60x50mm, complete with safety microswítch

Mod. TR/3A
Protections for radial drilling machínes, hexagonal screen, adjustable in height, provided with safety microswitch.

Mod. TR/3B
Protections for radial drílling machínes, frame of steel and Polycarbonate, adjustable in height, with safety mícroswitch.

Mod. MO/1 A=140 B=150
Schermo/Screen 130x130
Safeguard for grinder, provided with clutch, easy to fít, consists of aluminum frame with polycarbonate screen.

Mod. MO/2 A=190 B=180
Schermo/Screen 140x180 
Safeguard for grinder, provided with clutch, easy to fit, consists of aluminium frame with polycarbonate screen.

Mod.MO/2LSM 
Design same as mod. MO/2 but with LED lamp.
Screen 200mmxh 180mm

Mod. MO/2CMDS
Pair of safeguards for grinder with polycarbonate screen,complete with microswitch system. Screen size 190 x 180 mm

Mod. PP/1
Safeguard for press with metal frame and shockproof grate. The front side can be opened. At both sides sliding iron rods allow work pieces of different dimensions. Provided with microswitch system. Sizes on request

Mod. ST
Safeguard for slotting machíne complete with microswítch. Steel frame and shockproof transparent screens.

Safeguards for machines and working piaces.
Wide range of standard dimensions (height and width) with simple and safe
mounting systems.
The panels may have the followíng finish:
• Electro-welded metal screen
• Key-pattern pressed steel-sheets
• Transparent materíal.

Mod. PA
The antiskidding foot-boards REPAR 2, are made of polyethylene and withstand chemichal products such as oils, paints, acids, greases and diluents. Non-toxic,have an excellent acoustic absorption and heat insulatíon. Easy to lay

Safety guard for boring mill
Safety guard for the working area, s/iding vertically by means of a counterweight moving on steel ball bearings whit the outer wheel. The safety microswitch stops the machine when the guard is open.
A= column height varies in accordance with screen dimensions
8= screen dimensions on request

Mod. TRTCM
Manual locking complete with micro switch. Construction in steel and
polycarbonate.

Mod. TR2TCM
Manual locking complete with micro switch. Construction in steel and polycarbonate 6mm. Front and rear chuck protected.