Ryazan RT 755 F 3 Chuck and center lathe

RYAZAN RT 755 F3 CHUCK AND CENTER LATHE 
Model 

The lathe is intended for rough and finish turning of cylindrical, taper and contoured surfaces of parts type of shafts per one or several passes in closed automatic cycle. It also performs drilling, counterboring, reaming and thread cutting in centre holes. The machines are made of different versions depending on
CNC system  main drive feed drive turret, etc. Design features provide high production, machining accuracy and convenience of operation. automatic selection of spindle speed per a program high rigidity of the lathe main units
high speed of carriage idle run mechanized travel and clamping of the quill and tailstock tracing servo drives of feeds and NC unit with feedback mechanized removing of chip by the conveyor. 8 position turret with horizontal axis and 4 position turret with vertical axis are used on the machine. They are completed with quick change blocks. The machines can be equipped with boring bar forburning tool post per order. 
SPECIFICATIONS 
Swing set over the bed 
machine over the carriage 
Maximum length of workpiece 
Maxim. dimensions of outer machined surface, over the bed in length 
Height of cutting tool,
Turret positions  
Spindle hole diameter, 
Spindle inner taper Metric 
Discreteness of travel 
Spindle speed, rpm 
No, of controlled axes
Carnage rapid travel, mm min 
longitudinal
Cross
Maximum torque on spindle,
Main drive. Overall dimensions with separately standing equipment, mm
Length Width  
Height Standard equipment
spares and accessories.
Optional Accessories
device for tool alignment
chip conveyor.