Sahinler HKM 45 ,60 Hydraulic steelworker

Sahinler HKM 45, 60 Hydraulic steelworker

Technical Specifications and Standard Accessories
Electric Back Gauge HKM 45 HKM 60
Five working stations
1- Hole puncher Clean hole drilling and punching operations up to 11 mm thickness and 38 mm diameter can be done easily.
The punches and dies can be replaced easily and can be obtained from us in a short time.
2- Flat bar shear Round materials up to 40 mm and square materials up to 35 mm can be cut quickly in this section. Blades can be replaced and U-1 and T profiles can be cut. The special blades can be obtained from us.
3- Angle shear Various sizes of angle bars can be cut at 90 and 45 degrees thanks to the blades in the special Z shape.
4- Sheet metal shear You can quickly perform various daily sheet metal cutting operations here with the 300 mm blade.
5- Notching and copering OPTIONAL With the rectangular notching mold that comes with the machine, you can do copering and notching operations very cleanly. The special notch works required for the Hydraulic Stripper can be obtained from us. Technical Specifications and Standard Accessories Punch and die Ø 22 Punch holder Flat bar cutting blade Solid round-square cutting blade Angle shear 1- Notching blade Notching punch and die Ø 22 Central Lubrication system Blade holder for punching 38 mm up to 11 mm thickness Manual book