Schechtl MAE Motor bending machine

Schechtl  The motorized bending machine Model MAE with back gauge is precise and time saving in positioning sheet metal up to a width of 1000 mm with an accuracy of. The sheet metal is guided in a material friendly way over the profiled support table. The new Autoprof control is easy to use with a touch screen monitor. By transferring the sketch to the screen, a selection of profiles is created. The adjustment of the profiles can be done at any time and can be saved in a database. These possibilities speed up the workflow and save valuable time. The advantages of Autoprof control are easy operation, an expandable database, fast profile search, and selection. It uses the proven CNC graphic technology of Schechtl patented since 1996. The standard equipment of the Model MAE includes a motorized bending machine with spindle drive for the upper beam, low noise SEW transmission brake motors, Moeller control elements with appropriate circuit and safety elements, a bending beam gear drive on both sides, and maximum freedom of movement within the area of the rails and bending beam. The bending and upper beam have a soft start, and the standard quick clamping system of the profile rail is by a click system. The shortest changeover times to segmented tooling are achieved through the click system registered utility model no 202 18. The maximum opening height is 225 mm. The Autoprof control includes a PC program, a 15 color touch monitor, a motorized back gauge of 6 lengths with precision ball roller spindles, 12 back gauge fingers with overload protection, one profile rail 20, for the upper beam, one insert rail 68 24 for the bending beam, one flat rail for the lower beam, and a movable foot switch. An energy supply of 16 Amp with a 5m cable is also included. 2D + 3D graphic representation Smooth start of bending beam at MAX and MAB Smooth start of bending and upper beam at MAE Motor driven back gauge 1000 mm Foot switch. energy supply with 5 m cable by delivery For deliveries within the EU. Accessories Split goats foot tooling Segmented rail with screw on system and click on system Model MAX, MAB, MAE Shortest change over time of segmented tooling with a height of 55 or 93 mm, fixed with screws or click system Delivery includes segments for the entire working length of the machine, as well as segments with shorter length and corner segments. Special rails for bending special profiles available upon request. Two man operation model MAX, MAB, and MAE with autoproph, 1 or 6 fold control, retrofittable as a standard. Split bending beam, essential for bending cassettes, boxes, or covers.