Schlebach Folding and edge bending machine

Schlebach Folding and edge bending machine 

Machines for producing standing seams and folded edges

Standing seam machine for straight profile plates: Produces angular and double standing seams in one operation. Optional accessories include a roller cutter to cut installed strips. Dimensions: 370mm x 250mm x 280mm. Seam profile height: 25mm. Weight: approximately 17kg. Drive: 0.3kW, 230 Volt, 1-ph. Performance: approximately 11m/min.

Standing seam machine for straight or arched profile plates: Produces angular and double standing seams in one operation, for straight or arched profile plates from a radius of 600mm. Adjustable for seam profile heights of 25mm and 38mm. Optional accessories include a roller cutter and a set of special rollers for stainless steel sheet. Dimensions: 450mm x 310mm x 230mm. Weight: approximately 23kg. Drive: kW, 230 Volt, 1-ph. Performance: approximately 9m/min.

Edge bending machine: Folds up both edges of parallel plates in a single operation, with turn-up height between 25mm and 60mm, and intake width of 350mm to 1,000mm, infinitely adjustable. Dimensions: 1,270mm x 960mm x 420mm. Weight: 90kg. Drive: 230 Volt, 1-ph, 0.37 kW. Gauge: Non-ferrous metals up to 0.8mm, Steel sheet up to 0.7mm.

Double standing pleating machine: Folds double standing seam of profile plates in a single operation, with seam profile height infinitely variable from 20mm to 40mm, depending on DSM profile or turn-up height. For turned-up metal sheets, two seam operations are necessary. Optional DSM strip can produce strip profiles with a height from 40mm to 60mm. Dimensions: N/A. Gauge: Non-ferrous metals up to 0.8mm, Steel sheet up to 0.7mm.

Gliding joint machine: Cost-effective machine for fixed, gliding, and suspended joints from strip material. Options include a bending station with automatic strip infeed and production runs, with pre-selection of quantities. Gliding punch optionally available as a special version with a slot width of 60mm or 70mm. Dimensions: 1,550mm x 700mm x 1,200mm. Weight: 280kg. Drive: kW, 400 Volt, 3-ph. Automatic infeed. Gliding joint punch is a motorized unit that produces gliding joint bottoms