SHUIPO Corrugated plate forming machine 1

SHUIPO  Introduction
The corrugated plate forming machine is mainly composed of rack, drive section, upper roller, lower roller, feeding guiding mechanism and front and rear workbenches. The corrugated plate forming machine shall process the flat plate to corrugated plate by rotating the upper and lower roller símultaneously with good consistency, high efficiency. The height adjustment of the corrugation shall be driven by the motor, and adjust the height range of the corrugation shall be adjusted by operating the button on the control cabinet, which is convenient to adjust and with reliable performance.
Application

Corrugated plate is a kínd of new buílding material, which is widely used in bridge, column, single-span and multispan rack structure buildings. The surface of the web plate is wavy, when compared wíth the remove plate H style steel, it can save about 20 -60 steel in the same strength, and has extra high cost performance in maпy application places which use large span and crane beam among which the span of the corrugated web plate H style steel can reach to 40m , whích can meet the requirement of energy
saving and consumption reduction nowadays, and thus, it is the development trend ín the future.
parameters of the corrugated plate forming machine
Name of the Parameters  equípment
Strength of applicable <_345MPa material

Applicable raw Thickness of material
applicable steel plate 2-4mm <_345MPa
 Width of applicable 500-1500mm -steel plate
Corrugation heíght 40-46mm
Machining dímension
Distance of the 155mm corrugation

Input way of the Roller way steel plate

Output way of Conveying chain the steel plate
Input power
Gross weight of About 10T the equípment
Notes: all parameters, words and pictures are for reference only. The manufacturing materials given to the customers are subject to the busíness contract.