Skoda IFVW 1B Milling attachment

SKODA MACHINE TOOL DORRIES SCHARMANN GROUP

Technological Accessories Milling Attachment The milling attachment IFVW 1 B Basic Characteristics The milling attachment IFVW 1 B is used for light milling operations and for drilling holes. The outside ram face dimensions of the milling attachment allow machining even in limited spaces of workpieces. An accuracy of angle setting in a particular position can be checked by precise built-in pins. The pallet PA, which is supplied as a special accessory for this attachment, facilitates its handling in the machine tool operating space or outside when being dismounted or stored.

The Technological Accessories Exchange Equipment 1S0 N-X, supplied as a special accessory of the machine tool, is designed to transport the pallet PA with the milling attachment between the lay-down place and the working space of the machine tool.

Main Dimensions 

Technical Data Parameter Unit Value Speed Ratio Between Tool and Machine Spindle - : 1 Max. Revolutions rpm 2000 Max. Torque up to 500 rpm Nm 180 Max. Power in the Range of 500-2000 rpm kW 10 Clamping Hollows in Work Spindle Both Sides - 1S0 40 + Morse 4 1S0 50 only Set of Collets for Clamping Tools with Cylindrical Shanks Dia mm Weight of Milling Attachment kg 300

Note: Utilization of the mentioned speed and power values depends on main drive quality of a respective horizontal milling and boring machine.

Special Accessories Data for an Order Pallet PA for 1FVW 1 B name and type of the attachment Total Weight kg 130 Type and Production Number of the Machine for Which the Attachment is Required

Skoda Machine Tool Phone Skoda Machine Tool Dorries Scharmann Group Dorries Scharmann Group Tylova PizenCzech Republic