Skoda IFVW 2B Milling attachment

SKODA MACHINE TOOL DORRIES SCHARMANN GROUP

Technological accessories

Milling attachment The milling attachment IFVW 2B is used for heavy milling and drilling operations. It can be attached to the ram face of the machine either automatically or manually. An angle of positioning can be read out on a scale with a nonius. The accuracy of angle setting in a selected position can be checked by means of precise built-in check pins. The turnable part is turned and clamped manually. A special nozzle and respective cutting liquid distribution piping serve for easy connection to a tool cooling system.

The pallet PA, which is supplied as a special accessory for this attachment, facilitates its handling in the machine tool operating space or outside when being dismounted or stored. The exchange equipment 1SQ N-X, which is supplied as a special accessory of the machine tool, is designed for transport of the pallet PA carrying the attachment between the lay-down place and the working space of the machine.

Main dimensions: 135, 150, 205, 95

Technical data Parameter Unit Value Speed ratio between tool and machine spindle - 1:1 Max. revolutions rpm 1000 Max. torque up to 200 rpm Nm 2600 Max. power in range of 200-1000 rpm kW 55 Clamping hollows in work spindle - ISO 50, ISO 60 Weight of milling attachment kg 276-316

Note: Utilization of the mentioned speed and power values depends on main drive quality of a respective horizontal milling and boring machine.

Special accessories data for an order Pallet PA for 1FVW 2B Total weight kg 128 Name and type of the attachment Type and production number of the machine for which the attachment is required Type of tool clamping Size of clamping taper in the attachment spindle, clamping extension length Specification of special accessories

Skoda Machine Tool Phone: Dorries Scharmann Group Dorries Scharmann Group Tylova  Pizen  Czech Republic