Skoda IWD 320 Boring attachment

SKODA MACHINE TOOL and DORRIES SCHARMANN GROUP are companies that produce technological accessories such as the Boring Attachment. The attachment is used for boring and recessing the milling spindle of the machine, for machining round holes and outside cylindrical and face surfaces. It can be attached to the milling spindle of the machine by bolts, and is designed for axial movement.

Attachment IWD 320 is a specific type of boring attachment that can be used for a range of technologic operations, including facing and machining identical outside cylindrical surfaces. It is attached to the milling spindle of the machine via a carrier and a set of adapters, and is designed to handle the attachment during transport or storage.

The attachment has a prismatic guide for clamping a tool holder from a set of tool holders, and the size of the adapter is determined by the type of machine it is used on. The attachment can be rotated and has a maximum torque of 4000 Nm and maximum cutting forces of 8000 N and 6300 N for boring and face turning, respectively. The attachment also has a maximum revolution speed of 100 rpm and a slide out-travel of 90 mm.

To order the attachment, the name and type of the attachment, the type and production number of the machine for which it is required, the size of the clamping taper in the spindle of the machine, and the specification of any special accessories must be provided.

The total weight of the attachment, including tool holders, is between 181-191 kg. SKODA MACHINE TOOL can be contacted at 004219 773 3477 and DORRIES SCHARMANN GROUP can be contacted at 004219 773 8554. Both companies are located in the Czech Republic.