Skoda P SUA 100 125 Multi lathe machine

Skoda P SUA 100 125  Multi-Operation Set-Ups for Machining of Shafts and Similar Parts

The ŠKODA Type P-SUA 100 Precis and ŠKODA Type P-SUA 125 Precis are set-ups designed for precision machining of shafts and similar parts on machine tools that are fitted with numerical control. These set-ups allow for multiple operations to be performed with a single clamping, including turning, copying, turning of threads, turning of slow tapers, milling (transverse and longitudinal), drilling (axial, extra-axial, and cross), grinding, and indexing of the position of the workpiece.

The fundamental parts of these set-ups are the Type SUA 100 Precis and SUA 125 Precis lathes, which are manufactured for maximum diameters of workpieces of 1080 and 1320 mm, respectively, and for lengths of 3 to 12 meters. They are supplemented with further basic units and attachments for various purposes.

The interconnecting wiring material is comprised of the interconnecting lines between the switchboard and the terminal board of the main motor, the terminal board on the machine, the cooling equipment motor, and the swarf conveyer motor. It is supplied under the condition that the switchboard is situated in accordance with the data for the working drawing of the foundation or that its location is exactly determined by the customer. All the necessary data for all the interconnections are given in the accompanying documents of the machine, and the customer can make them himself.

Machines with greater turning lengths can be fitted with an additional carriage of the same design as the basic carriage.

Specification:

Swing over bed

Swing over carriage

Width of bed

Maximum weight of workpiece

Maximum torque on spindle

Output of main motor

Minimum economical machining diameter

Number of spindle speeds

Speed range

Diameter of front bearing of spindle

Taper in spindle, metric, 1:10, dia

Maximum diameter of external clamping on jaw

Number of feeds

Range of longitudinal feeds

Longitudinal rapid traverse

Maximum cross-section of tool

Diameter of tailstock sleeve

Traverse of tailstock sleeve

Taper for tailstock centre, 1:10, dia

Apex angle of centres

Standard Equipment:

1 piece carriage with tool holder and control panel, with numerical indication of position of tool for 2 coordinates

1 piece tailstock with built-in live centre socket, with spring-loaded tailstock sleeve and indication of thrust on centre

1 piece centre into spindle, taper 1:10, 80 mm dia., apex angle 60

1 piece centre into tailstock, taper 1:10, 80 mm dia., apex angle 60

1 set guards of longitudinal slide

1 set guards of compound rest

1 set electrical equipment, complete, 380 volts, 50 cycles, including initial supply of spare parts

1 set tables and indicating plates

1 set tools for operation of machine

1 set accompanying technical documents of machine

Improvements are continuously being made on the machines and equipment, so the actual design may differ from the described design or illustrations in some details.