Skoda TS Plzen Rolling mills and lines

Skoda TS Plzen Rolling Mills and Lines Version: September 2008

TS PLzen Quality Certificates

The Company History 1859 Foundation of Skoda Works 1866 Beginning of production of rolling mills and hydraulic presses 1932 Beginning of production of equipment for sugar industry 1946 Foundation of Heavy Machinery Plant SKODA TS 1992 Privatization of SKODA 1993 Establishment of the limited company SKODA TS 2000 Establishment of the joint-stock company SKODA TS 2003 APPIAN GROUP became a new owner of SKODA HOLDING 2004 SKODA TS became the member of ZP GROUP 2007 SKODA TS changed to new frame and trade mark TS Pizen Version: September 2008

Production Programme of TS Plzen

Curing presses

Rolling mills

Hydraulic presses

Sugar plants

Production of machinery parts according to clients' orders

Scope of Activities From project planning evaluation, preparation of documents for manufacturing, manufacturing to putting into operation, and service consultancy. Version: September 2008

TS Pizen, reconstruction and modernization of rolling mill SKODA B3-1000 with 20 high rolls. The customer is PATURLE ACIERS from France. The basic parameters include carbon steels, a maximum entry thickness of 3 mm, minimum exit thickness of 0.1 mm, maximum strip width of 860 mm, a coil weight of 12,000 kg, work roll diameter of 64 mm, and rolling force and speed of 2.3 MN and 8 m/s, respectively. The version is from September 20.

T5 Pizen, reconstruction and modernization of four-high rolling mill 1700 entry section. The customer is DUNAFERR-VOEST ALPINE Kft from Hungary. The basic parameters include a strip thickness of 1.6-5 mm, maximum strip width of 1550 mm. The version is from September 2008.

T5 Pizen, reconstruction and modernization of four-high rolling mill 1700 entry section with a straightening machine and an off-bender roller table. The customer is DUNAFERR-VOEST ALPINE Kft from Hungary. The version is from September 2008.

TS Pizen, reconstruction and modernization of four-high rolling mill LOEWY. The customer is WMN Sp. Gliwice from Poland. The basic parameters include copper and alloys, maximum entry thickness of 18 mm, minimum exit thickness of 0.25 mm, maximum strip width of 750 mm, coil weight of 3000 kg, work roll diameter of 355 mm, and rolling force and speed of 10 MN and 2.4 m/s, respectively. The version is from September 2008.

TS Pizen, reconstruction and modernization of 2-stand tandem mill. The customer is Koice from Slovakia. The basic parameters include steel, an entry thickness of 0.18-1.3 mm, maximum exit thickness reduction of 5, maximum strip width of 1050 mm, coil weight of 15,000 kg, work roll diameter of 500 mm, and rolling force and speed of 5 MN and 30 m/s, respectively. The version is from September 2008.

T5 Pizen, reconstruction and modernization of 4-stand tandem mill. The customer is STEEL Košice from Slovakia. The basic parameters include a strip thickness of 1.8-5.0 mm, minimum exit thickness of 0.4-2.0 mm, a strip width of 700-1550 mm, and a maximum coil weight of 30,000 kg, work roll diameter of 500 mm, and rolling force and speed of 18 MN and 25 m/s, respectively. The version is from September 2.

TS Pizen, reconstruction and modernization of 4-stand tandem mill entry section. The customer is STEEL Košice from Slovakia. The basic parameters include a strip thickness of 1.8-5.0 mm, maximum strip width of 1550 mm, and maximum coil weight of 300,000 kg. The version is from September 2008.

TS Pizen, reconstruction and modernization of hot rolling mill DUO 900. The customer is Kovohute Rokycany from Czech Republic. The basic parameters include Ni and alloys, an entry thickness of 115-130 mm, exit thickness of 8 mm, a strip width of 550 mm, a work roll diameter of 730 mm, and rolling force and speed of 8 MN and 1.5 m/s, respectively. The version is from September 200.