SNG 2500X12000 CNC Horizontal lathe 1

TECHNICAL OFFER HORIZONTAL LATHE SNG 2500 x 12000 CNC

MAIN FEATURES Work piece Maximum swing over the bed Maximum swing over saddle Distance between centers: 12000mm Diameter of the faceplate with four independent jaws: mm Max. load between centers: To. Max. load between faceplate and steady rest: To. Max. load on a single steady rest: To. Max. load supported by faceplate: To. Max. load supported only by faceplate, without any auxiliary rest: mm Distance from faceplate front surface.

Headstock Spindle speed range, 4 steps Main motor, SIEMENS type, not included

Power Kw

Base speed

Max. speed Max. torque at daN x m The slides groups Cross slide: mm Working and rapid feed rates of the longitudinal slide in. Working and rapid feed rates of the cross slide in. Tool carrier feed mechanism type Z axis: double pinion rack, backlash-free system. Measuring system Z axis: pinion rack/rotary encoder type. Cross saddle feed mechanism X axis screw type. Measuring system X axis encoder type. Servomotors 1FT 6 SIEMENS type not included Nm / 2000 Guiding system of longitudinal saddle and the cross saddle blocks Linear bearings sets x GRT 3= 5 pcs. plus GRT 4= 3 pcs. for each saddle. NOTE: The longitudinal saddle and the cross saddle are provided with the same guiding system. The roller blocks are made in Romania. Approximately equivalent roller blocks type INA RUS 26 086 and RUS 38 134.

Tailstock Tailstock shaft travel automatically: mm. Quill rapid motion: mm/min. Tailstock rapid motion 2 steps: mm/min.

Beds Headstock bed

Number of guide ways

Bed width: mm

Guide ways width: 2 pcs. = 170 plus 1 pc. = 180 mm. Tool carrier bed

Number of guide ways

Bed width: mm

Guide ways width: 2 pcs. = 120 plus 1 pc. = 100 mm. Overall dimensions and weight approximately. Length: 500 mm Width: 000 mm. Height: 500 mm. Weight without special attachments: To. Standard Accessories: Set of tools for assembling operation Set of leveling blocks for the bed Steady rest roller type, 2 pieces Electrics and numerical control: The machine will be prepared for motors, electronics and electronics Siemens type and numerical control SIEMENS 840 D. Approximately installed power, 220 KVA.

DELIVERY SET The delivery set: Bed Fixed-stock Tailstock Slides group Control panel support Hydraulic unit, ATOS type components Case with foundation Case with various parts Telescopic covers fitted on beds Steady rests 2 pcs.