Sony P10 Digital printer

Sony P 10 Digital Print The measured values can be printed out for data easily connected to a display unit. The operation analysis and quality control is simple. Equipped with a convenient indexing function.

Index No. 001 001 002 002 Digital Gauging System Reset of index 003 003 G Series number, 004 0100. t0 Polarity L---_- The position of decimal point can be changed. index number LY-110 Series selector switch - Data of two or three display Decimal point setting units can be printed out in switch series. Optional 00 -x -002 -y The advance of index 002 -Z number is suspended. _002 No index number LI05 05. 2 55 23 is printed. 003 54. 460 Inside master The output of a display unit should be 3-state BCD output. Features Specifications Connection to a display unit is easy. The connecting cable suitable 1 Signal Positive logic for each display unit is available as an optional accessory. BCD code As the printer is equipped with a test pattern printing function, it can self-check its printing behavior anytime. Printing Paper Width: 57 mm/inch Prints out 3-digit index numbers. The index number is very useful when sorting out various printed out data. Motor Drive System Intermittent drive system When you do not want to advance the index number because of a measurement error, the advance of the index number can be suspended. Printing Speed Approx. lines/sec. ed. When the index number is not necessary, its printout can be inhibited. space between lines: mm/ Space inch Space between characters: mm/

inch FP SEL. INDEX 11 I [O,0 I Power Supply 100, 110, 120, 220, 240 V 10, 50/60 Hz / START RESET PRINT FEED POWER Power Consumption When printing: Approx. 100 VA 4ł fF Г HoιD When not printing: Approx. 30 VA mask Outside Dimensions 195 W x 245 D x 80 H mm x x inch Connecting Cable Model Display units to be connected

DATA IN - LYK- LY-101, LY-105, LY-110 Series TEST I + ex LINE Connection to 2 or 3 display units The BCD output of the display unit should be 3-state. Display Display Display Unit Unit Unit X Y Z Outline Drawing Printer 3-State BCD Output When the control input is 0, the ordinary BCD signal is output. When the control input is 1, the BCD signal is put into Disable condition.

Dunkerkenstraat 21, 9723 BN Groningen Postbus 429, 9700 AK Groningen Nederland Telephone 050-877 877 Fax 050-877 899 Schut Geometrische Meettechniek bv Specifications are subject to change without notice. Sony Magnescale in. Toyo Building, 9-17, Nishigotanda 3-chome, Shinagawa-ku, Tokyo, 141 Japan Telephone: Tokyo 490-3911 Telex: 02466289SONYMSJ Cable: SONYMAGNESCALE TOKYO 1981 SONY Printed in Japan