Stanko 1516 Vertikal boring and turning machine

Stanko 1516 VERTICAL BORING AND TURNING MILL

PURPOSE The machine is designed for processing components made of ferrous and non-ferrous metals, from locked positions and a horizontal side, using a four-position tool holder. The mill can be used for cylindrical and taper turning, boring, planar turning, grooving, cutting off, drilling, counterboring, and reaming of holes, as well as for semi-finish and finish facing by a vertical tool head whose speeds are changed automatically, thus allowing stepped-constant speed of cutting. The machine's versatility can be broadly expanded with the aid of a self-centering faceplate and some additional attachments intended for threading, taper turning, and machining components to size to stops, as well as employing special attachments designed for operation with coolant.

SPECIFICATIONS Faceplate diameter: mm Range of tool head vertical and horizontal feeds: mm/rev Maximum distance from faceplate to vertical slide: mm Speed of tool head setting traverses, mm/min: Distance from faceplate to crossrail lower edge: mm Crossrail traverse speed: mm/min Maximum dimensions of components machined: mm Three-phase A-C electric motors: Main drive: Diameter: mm Power: kW Speed: rpm Vertical or horizontal tool head setting traverse drive: Side tool head: Diameter of component that can be machined: mm Power: kW Speed: rpm Maximum work mass: kg Vertical tool head traverse: mm Horizontal tool head: Power: kW Speed: rpm Maximum angle of vertical tool head swivel: deg Diameter of turret head hole: mm Maximum traverse of side tool head: Horizontal slide Power: kW Speed: rpm Maximum cross section of tool shank: mm Number of faceplate speeds: Range of faceplate speeds: rpm Number of tool heads feeds Machine overall dimensions: length x width x height, mm Machine weight: kg

SUPPLIED: Attachment for turning form surfaces on rotary bodies to a templet by side tool head electric copying device Attachment for cutting threads and taper turning by vertical tool head Attachment for cutting threads and taper turning by side tool head Electrical equipment set Work gripping jaws set Arbors for cutting tools set horizontally Lubricating gun V-belts set vertically Spanners and wrenches set Technical documents Self-centering faceplate Attachment for machining with cutting fluid on special order Attachment for turning form surfaces on rotary bodies to a templet by vertical tool head electric copying device

Design and specifications of the machine illustrated in this leaflet are subject to change without notice.