Stanko Single vertical turret lathe

Stanko The Single-Headed Vertical Turret Lathe can simultaneously carry all the 2 AFD LELL DGT attachments, except the one for machine paxte. The main parameters are provided with a coolant which cannot be mounted together with attachments. The dimensions are according to GOST 600-80, with the necessary faceplate.

The accuracy grade is based on GOST 8-77 and it is not acceptable to use attachments on previously delivered lathes without noticeable changes to the lathe. The accepted diameters for workpieces are from 1250 to 1600 mm, and the maximum height of the workpiece admitted is 1000 mm. The range of spindle speeds and feed rates enable highly efficient work to be performed at high cutting speeds.

The upper tool head position and overall dimensions of the lathe are provided for horizontal and vertical positions. The maximum tool head slide value and the upper tool head's diameter division value are provided for horizontal and vertical positions. The dimension and diameter values of the lathe's operation are provided, including available cutting speeds and the diameter of the toolhole.

Peja Stemmarch is the contact for the lathe and can be reached at Postbus 117 6800 AC Arnhem, with a telephone number of 085 541 740 and a telex number of 45123. The maximum weight of the lathe is 21,500 kg, and the main data includes the value of the upper tool head, the number of tool heads, and the main drive angle.