Supermax TV Vertical machining center

The TV-Series machining centers are designed to handle challenging machining requirements with superb machine rigidity and performance. They have been successfully utilized in a wide range of applications, from heavy roughing to precision mold dies machining. The unique T-base structural design is one of the many innovations developed by YCM and is patent-protected throughout the world. Its overhang-free table movement is supported by highly rigid Meehanite casting to ensure the best dynamic leveling accuracy, machining rigidity, and durability. The patented T-base structural design also offers the smallest machine footprint and the best chip disposal system in its class.

To achieve exceptional machining accuracy, all critical contact areas of major components are precision-ground for the best assembly accuracy. All hardened and ground precision ball screws are pre-tensioned and directly coupled to the servo motor to assure minimal backlash and optimal machining rigidity. The counterweight of the Z-axis headstock is secured by a guide bar to minimize machining vibration.

The X-axis underneath the Y-axis makes this series of machines take virtually 20-30% less floor space than other machines of the same travel capacity. Due to the patent-awarded T-base design, dual motorized chip disposal screws are installed for easily removing cutting chips out of the machine.

Various high-speed spindle options are available to meet the utmost machining requirements. The series deploys precision angular contact ball bearings of high-speed feature to reach max. 8000 rpm as standard. It is driven through power grip timing belts by a powerful AC servo spindle motor. Optionally, the high-low auto-shift gear transmission box can be adopted for high torque machining requirements - max. speed at 8000 rpm, and max. torque at 193, 701 lb-ft. An optional high-speed 10000 rpm spindle of precision ceramic ball bearings can be selected for high-speed finishing requirements. The TV-Series machining centers are available with various spindle modules of high-speed, high-power output to suit various machining requirements.

Y-Axis Complex 4-Slideway Design FORCE Spindle: FORCE - FORCE FORCE FORCE, Ballscrew Axial Rapid Feed Rate: P I E 12 m/min 472 ipm, 12 m/min 472 ipm, 12 m/min 472 ipm TV21108 / TV26106 COMPETITOR 10 116g DIMENSIONS Unit: mm inch SPECIFICATIONS Ø146A W116B W1468 W158B ll ll 1880 W21108 Ø26108 Spindle Speed: 45-8000 [10000] rpm 45-6000 [10000] rpm Spindle Taper: BT40 BT50 Front Bearing Diameter: ø70mm ø 100mm ø y TRAVEL X Axis Travel: 1400mm 1100mm 1400mm 1500mm 1800mm 2100mm 2600mm Y Axis Travel: 620mm 600mm 620mm 860mm 860mm 1020mm 4016 1020mm Z Axis Travel: 630mm 630mm 630mm 750mm 750mm 762mm 762mm Distance Between Spindle Nose: 142-772mm 168-798mm 153-783mm 150-900mm 150-90omm 200-962mm 200-962 mm Table Top: 661 6 02 5; 7, 7 87 Distance Between Spindle Center & Column Front: 615mm 615mm 615mm 920mm 920mm 1070mm 1070mm TABLE Table Size: 1500x600mm 1200x600mm 1500x600mm 1700x860mm 2000x860mm 2300x1020mm 2800x1020mm Load Capacity: 1500kg 3307lb 1200kg 2646lb 1500kg 3307lb 2000kg 4409lb 2000kg 4409lb 7000kg 15432lb 7000kg 15432lb The Height From Table Top to Floor: 875mm 865mm 875mm 970mm 970mm 1150mm 1150mm Number of T-Slots x Size x Pitch: 5 x 18mm x 100mm, 3 9^- 5 x 22mm x 150mm, 6 x 22mm x 150mm, 6 FEED Rapid Feed Rate X/Y/Z: 16/16116m1min 630/630/630ipm, 15115112m1min 591/591/472ipm, 12/12/12m/min 472/472/472ipm Cutting Feed Rate: 1-5000mm1min ATC Tool Magazine Capacity: 20, 24/30, 40, 24 [32/40]