Taurus Wotan Cutmax 4FT Boring and milling machine

Taurus Wotan Cutmax 4FT is a floor-type boring and milling machine with a RAM of 700mm and a spindle of 1000mm length and Ø160mm with hydrostatic bearings. The machine has two basic configurations: P and K. The P version has three axes, with the column traveling on the cross-travel only, while the K version has a column longitudinal travel besides the cross-travel. The machine's boring spindle taper is D1N 69871 IS0 50, and the milling spindle tool mount is IS0 65. The spindle speed range has four gear stages and ranges from 5-2000rpm. The main motor power is 80 kW. The spindle bearing type is hydrostatic, and the spindle longitudinal travel is 1000mm. The RAM longitudinal travel is 700mm, and the headstock vertical travel is 2000mm. The column cross travel is 118+ea., and the column longitudinal travel for the K version is 700mm. The machine has aerostatic guideways and a feed range of 1-5000mm/min for all axes. The machine's positioning accuracy according to VD1/DGQ 3441 is 0.018mm, and the repeatability is 0.005mm. The machine's circular interpolation is 0.018mm. The basic P version of the machine's net weight is approximately 57,320lb.