Taurus Wotan Cutmax Horizontal Boring and Mílling Machine

Taurus Wotan Cutmax 3PT 160:

In addition to the standard 3PT model, this machine can be equipped with a working spindle of 160 mm and hydrostatic system as an option. The table can withstand a load of up to 25 tons. The identification of axes is available.

Model 4PT is a RAM machine with a spindle of inches and a hydrostatic system. The standard table has a capacity of up to 88,1851b.

CUTMAX PT:

Cutmax PT is a horizontal boring and milling machine. It comes in three models, namely 2PT, 3PT, and 4PT. The boring spindle diameter varies from 120 mm to 160 mm. The RAM cross-section ranges from 340 x 340 to 13 x 13 mm. The spindle taper is D1N 69871 1S0 50 in all models. The milling spindle tool mount is 1S0 60 in 2PT and 3PT, and 1S0 65 in 4PT. The spindle speed range is from 20 to 3000 rpm in 2PT and 3PT, and from 5 to 2000 rpm in 4PT. The main motor power ranges from 40 kW to 134 kW, depending on the model. The spindle bearing type is either roller bearing or hydrostatic, depending on the model. The spindle longitudinal travel ranges from 600 mm to 1000 mm. The RAM longitudinal travel ranges from 700 mm to not applicable. The headstock vertical travel ranges from 67 mm to 2500 mm. The table cross-travel ranges from 2000 mm to 3000 mm. The column longitudinal travel ranges from 1250 mm to 1500 mm. The guideways can be either linear or aerostatic, depending on the model. The rotary table surface ranges from 55 x 63 mm to 98 x 118 mm, depending on the model. The maximum table load varies depending on the model, with the highest being 25 tons.