Tongtai TD Multi tasking turning center

Tongtai TD Multi-tasking Turning Center Feature Applies single power turret for turning and milling process 75 degree lathe structure allowing for good chip removal and controllability Low machine gravity center, allowing for overall structure to have good rigidity X/Y/Z-axis are orthogonal to each other, allowing for high straightness and positioning accuracy

The Cs axis is fed back by a rotary encoder with all components made of high quality. Different from the virtual Y axis, the real Y axis has multi-points positioning function. The minimum cast-iron. With excellent design, the structure is excellent straightness and positioning accuracy indexing increment of degrees allows able to decrease the influences of distortion and which is able to ensure high machining quality. various machining needs with different angles. vibration. With a highly rigid sliding carrier design, the TD series has outstanding machining capability.

Max. swing diameter mm 0700 Chuck inch 8 10 Bar capacity mm Ø51 064 074 X/Y/Z/B axis travel mm 230/t51/600/- 630 X/Y/Z/B axis rapid traverse m/min 30/15/30/- 30 Spindle nose A2-6 A2-8 Spindle speed rpm 4,500 3,500 2,500 Spindle motor kW Sub-spindle nose A2-5 Sub-spindle chuck inch - 6 Sub-spindle speed rpm - [5,000] Sub-spindle motor kW - .5/ Tool capacity pc 12